Table of Contents
Advertisement
a Pattern to be embroidered next
Note
• If the following message appears, rehoop
the fabric as indicated in the screen, and
then press
c
After the sticker position is detected, press
, and then remove the stickers.
a
.
USING THE CAMERA TO CONNECT PATTERNS
d
Affix the two embroidery positioning
stickers again according to the on-screen
instructions so that the next pattern or
positioning marks can fit in the embroidery
area.
Press
so that the camera detects the first
embroidery positioning sticker.
Note
• The positioning markers are shown with a
tilted appearance to make sure that as long
as the markers were placed with the red
outlined square, they will be read properly
and correct connection can be assured.
e
Affix the second sticker and then press
.
The camera detects the second embroidery
positioning sticker.
3
143
Advertisement
Table of Contents
