Table of Contents
Advertisement
EMBROIDERY
Memo
• If you need to restitch a segment or skip a
segment, you can touch
embroidery screen to continue to the next
pattern or return to the previous pattern.
Select the desired pattern in the embroidering
order, and then touch
a b c
a Return to the previous pattern.
b Embroidering order of current pattern/Total
number of segments
c Continue to the next pattern.
17
Embroidering Split Embroidery
Patterns
in the
This Upgrade KIT III includes several built-in large-
size split embroidery patterns.
Split embroidery patterns are large patterns that are
.
divided into multiple sections. A large pattern can
be created by embroidering the connected pattern
sections one after the other.
Additional split embroidery patterns can be
created in PE-DESIGN version 7 or later. For
details, refer to the manual for PE-DESIGN.
There are two methods: one uses the built-in
camera to connect the patterns and the other
connects the patterns manually.
■ Connecting the Pattern Sections
with the Camera
a
Touch
and then select a pattern.
*
To ensure the entire large-connect pattern can be
successfully embroidered, prepare fabric and
stabilizer at least 300 mm (12 inches) longer and
wider than total design size.
a
a Size of the entire pattern
Advertisement
Table of Contents
