Table of Contents
Advertisement
Embroidering
c
Select the satin stitch frame pattern of the same shape
as the appliqué. Embroider over the appliqué and base
b
fabric from step
to create the appliqué.
■ Method 2
a
Select a straight stitch frame pattern, and embroider
the pattern onto the base fabric.
b
Place the appliqué fabric over the pattern embroidered
a
in step
and embroider the same pattern on the
appliqué fabric.
• Be sure that the appliqué fabric completely covers
the stitched line.
c
Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
appliqué fabric.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
94
d
Reattach the embroidery frame to the embroidery unit.
e
Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.
• Do not change the size or position of the pattern.
Split embroidery patterns
Split embroidery patterns created with PE-DESIGN Ver.7 or
later can be embroidered. With split embroidery patterns,
embroidery designs larger than the embroidery hoop are
divided into multiple sections, which combine to create a
single pattern after each section is embroidered.
For details on creating split embroidery patterns and for more
detailed embroidery instructions, refer to the Instruction
manual included with PE-DESIGN Ver.7 or later.
a
Insert the USB flash drive containing the created split
embroidery pattern, and then select the split
embroidery pattern to be embroidered.
• For details, refer to "Retrieving embroidery patterns"
on page 100.
b
Select section
to be embroidered and touch
• Select the sections in alphabetical order.
c
Touch
and touch
.
.
Advertisement
Table of Contents
