Table of Contents
Advertisement
Resume Feature
If the machine is turned off while the pattern
connecting function is being used, the machine
will return to the operation indicated below when
it is turned on again. The machine operation will
differ depending on when it is turned off.
Example: When connecting two patterns
Select the first pattern. Press the pattern connection key
Begin embroidering the first pattern.
Finish embroidering the first pattern. (A)
If the machine is turned off during any operation in this box, the
machine will return to (A) when it is turned on again.
Select the second pattern.
Press
Specify the reference point for connecting the pattern.
Start detecting embroidery positioning stickers (2 locations).
Finish detecting embroidery positioning stickers. (B)
If the machine is turned off during any operation in this box, the
machine will return to (B) when it is turned on again.
Rehoop the fabric.
Finish detecting embroidery positioning stickers (2 locations).
.
USING THE CAMERA TO CONNECT PATTERNS
Begin embroidering the second pattern.
Finish embroidering the second pattern.
.
3
145
Advertisement
Table of Contents
