Table of Contents
Advertisement
MY DESIGN CENTER WITH SCAN
c
Using the magnets, affix a picture to the
scanning frame and attach the frame to the
machine. Refer to "Using the Scanning
Frame" on page 160.
d
Press
.
Note
• When scanning starts, some of the machine
lights will turn off in certain circumstances,
in order to increase the scan quality. The
machine lights will return to their original
brightness when scanning ends.
When the following message appears, press
Scanning begins.
*
To stop scanning and return to the screen in
d
step
, press
162
.
e
When scanning is finished, scanned image is
displayed transparently in the pattern
drawing area.
f
Using the included dual purpose stylus,
press
, and then draw lines to trace the
image.
*
For details on drawing lines, refer to "Drawing
Lines" on page 151.
.
a Transparency adjustment
*
Press
or
background.
Each press of
the line pattern darker. Each press of
the background, making the line pattern lighter.
g
After editing the pattern, press
specify the settings for pattern.
a
to adjust the transparency of the
lightens the background, making
darkens
to
Advertisement
Table of Contents
