Download  Print this page

Attaching The Embroidery Unit; About The Embroidery Unit - Brother 882-W30 Operation Manual

Embroidery and sewing machine.
Hide thumbs

Advertisement

ATTACHING THE EMBROIDERY UNIT

About the Embroidery Unit

CAUTION
• Do not move the machine with the embroidery
unit attached. The embroidery unit could fall
off and cause injury.
• Keep your hands and foreign objects away
from the embroidery carriage and frame when
the machine is embroidering. Otherwise,
injuries or damage may result.
• To avoid distorting your embroidery design, do
not touch the embroidery carriage and frame
when the machine is embroidering.
• Be sure to turn off the power before installing
the embroidery unit. Otherwise, the machine
may be damaged.
• Do not touch the inner connector of the
embroidery unit. The pins on the embroidery
unit connection may be damaged.
• Do not apply strong force to the embroidery
unit carriage or pick up the unit by the
carriage. Otherwise, the embroidery unit may
be damaged.
• Store the embroidery unit in a safe place to
prevent damage to the unit.
• Do not push on the carriage when installing
the embroidery unit onto the machine. Moving
the carriage may damage the embroidery unit.
• Allow sufficient space around the embroidery
unit. Otherwise, the embroidery unit could fall
off foreign object, and may cause injury.
• Do not touch the embroidery carriage until the
initialization finishes.
Note
• You can also sew utility/decorative stitches
with the embroidery unit attached. Touch
and
. The feed dog will
automatically raise for utility and decorative
stitching.
a
Turn the main power to OFF, and remove
the flat bed attachment.
ATTACHING THE EMBROIDERY UNIT
b
Insert the embroidery unit connection into
the machine connection port. Push lightly
on the connection port cover until the unit
clicks into place.
a Embroidery unit connection
b Machine connection port
Note
• Be sure there is no gap between the
embroidery unit and the machine. If there is
a gap, the embroidery patterns will not
embroider with the correct registration.
c
Turn the main power to ON.
d
Press
.
 The carriage will move to the initialization position.
1
a
13

Advertisement

Table of Contents

   Also See for Brother 882-W30

   Related Manuals for Brother 882-W30

Comments to this Manuals

Symbols: 0
Latest comments: