Table of Contents
Advertisement
STITCH SETTINGS SCREEN
■ Region settings
a Shows the stitch type and color for the selected
region.
b Shows the stitch settings for the selected region.
Fill stitch settings
Specifies the sewing direction. Select
Direction
"Manual" to change to the desired direction
of fill stitch.
Specifies the stitch density of fill stitch.
Density
Specifies to correct the shrinkage of the
Pull
pattern by slightly shortening or lengthening
compensation
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Select if you need or do not need the under
Under
sewing for the stabilized fabric.
sewing
Stippling stitch settings
Specifies the length of a stitch of the
Run pitch
stippling stitch.
Specifies the spacing between the stitches
Spacing
when embroidering the stippling stitch.
Distance
Specifies the offset from the pattern outline.
Single/
Specifies the stitch type.
Triple stitch
Decorative fill
Increases/reduces the size of the pattern.
Size
Direction
Specifies the rotation angle of the pattern.
Select whether "ON" or "OFF" the outline is
Outline
also converted to embroidery data. If "ON" is
selected, the number of thread jumps can be
reduced.
Randomly varies the line.
Random shift
Position offset Specifies the reference point for the pattern.
158
a
Use
changed.
Each press of
selected pattern in order.
a
b
Select the setting to be changed, and then
change the setting in the screen that
appears. (In this example, the sewing
direction will be changed.)
b
The setting screen appears.
c
Press
the direction.
d
Press
*
Change other settings in the same way.
to select the line or region to be
moves the highlighting of the
, and then use
to change
to apply the setting.
Advertisement
Table of Contents
