Table of Contents
Advertisement
d
When scanning is finished, specify the
necessary settings in the scan image
confirmation screen.
Change the settings to adjust the image so it can easily
be converted to the desired pattern.
a
b
a Max. Number of
The number of colors in an image will
Colors
be reduced less than the number
specified here, and then the outline
will be extracted.
b Remove Background
Select whether or not the
background color will be included as
one of the colors.
c Line
Select whether or not the outline will
be detected as a line. A thick outline
can also be detected as a region.
When detected as a line, the line
thickness and color can be specified.
*
To stop scanning and return to the screen in
c
step
, press
Memo
• Press
to detect the outline.
Line thickness can be specified from 1.0
mm (1/16 inch) to 5.0 mm (3/16 inch).
• Press
to select the outline color.
Select by touching the color, or moving
icon using
selection screen.
c
.
in the color
e
Move
to frame the image for the
pattern.
f
Press
.
The screen for confirming the converted image
appears.
g
In the screen for confirming the converted
image, adjust the image as necessary as in
d
step
.
*
To enlarge the image, press
*
To display the image before being converted, press
. Compare the images before and after
being converted, and then change the settings if
necessary.
*
To return to the previous screen, press
After changes to the settings described above have
been applied,
to check that the image is as desired.
h
Press
.
The pattern drawing screen is displayed.
ILLUSTRATION SCAN
.
.
changes to
. Press
4
169
Advertisement
Table of Contents
