q
After the embroidery positioning stickers
have been detected, press
remove the stickers.
r
Lower the embroidery foot, and then
embroider the second pattern.
When embroidering is finished, the following
message appears.
To connect a third pattern, press
s
When the following message appears, press
.
t
Select the third pattern C, and press
USING THE CAMERA TO CONNECT PATTERNS
u
Press
patterns will be connected.
, and then
.
The pattern connection setting screen appears.
Memo
• You can edit the third pattern in this screen.
v
Specify the position of the third pattern
referring to the screen display.
In this example, press
.
b
a
c
a Connecting point
b Second pattern B
c Third pattern C
, and then select how the
2 times, and then press
. Press
after specifying the position.
3
141