Table of Contents
Advertisement
This message is displayed
when you attempt to select
a pattern after the USB
media in which the pattern
is saved has been
changed.
This message is displayed
when an error occurs with
the USB media.
This message is displayed
when a button, such as the
"Start/Stop" button, is
pushed while the presser
foot is raised.
This message is displayed
when it seems that the
upper thread has not been
threaded correctly.
This message is displayed
when the file size exceeds
the data capacity of the
machine.
Confirm the file size and
format.
This message appears if
the file format is
incompatible with this
machine. Check the list of
compatible file formats.
This message is displayed
when the image is deleted.
■ Alarm Sounds
If the operation was performed incorrectly, an alarm
sounds to indicate that an error occurred. If the
operation was performed correctly, the machine
beeps to confirm the operation.
Memo
• To cancel the operation beep or to change
the volume, press
settings screen, and then change the
setting for "Machine Speaker Volume". For
details, refer to the Operation Manual
(Sewing).
ERROR MESSAGES
This message is displayed
when you press
in the
screen other than the utility
stitch, or press
in the
screen other than the utility
stitch or character/
decorative stitch.
This message appears
when you try to start
embroidering with the dual
feed foot attached to the
machine. Remove the dual
feed foot before entering
the embroidery mode.
, display page 4 of the
195
5
Advertisement
Table of Contents
