Download  Print this page

Embroidering Split Embroidery Patterns - Brother 882-W80 Operation Manual

Hide thumbs

Advertisement

EMBROIDERY APPLICATIONS
c
Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
fabric for the appliqué piece. And then, reattach the
embroidery frame to the embroidery unit.
Note
• Do not remove the fabric from the embroidery
frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.
d
Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.

Embroidering Split Embroidery Patterns

Split embroidery patterns created with PE-DESIGN Ver.
7 or later, or PE-DESIGN NEXT can be embroidered.
With split embroidery patterns, embroidery patterns
larger than the embroidery frame are divided into
multiple sections, which combine to create a single
pattern after each section is embroidered.
For details on creating split embroidery patterns and for
more detailed embroidery instructions, refer to the
Instruction manual included with PE-DESIGN Ver. 7 or
later, or PE-DESIGN NEXT.
82
a
Insert the USB media containing the created split
embroidery pattern, and then select the split
embroidery pattern to be embroidered. (page 80)
b
Select section
to be embroidered.
c
Press
.

Advertisement

Table of Contents

   Related Manuals for Brother 882-W80

This manual is also suitable for:

882-w82

Comments to this Manuals

Symbols: 0
Latest comments: