Table of Contents
Advertisement
USING THE CAMERA TO CONNECT PATTERNS
While making sure that the two embroidery
positioning stickers do not peel off, remove
the embroidery frame from the machine,
and then rehoop the fabric. Be sure to hoop
the fabric so the next pattern and both the
embroidery positioning stickers are within
the embroidery area. Reattach the frame
and press
a Pattern to be embroidered next
b Centers of large circles for stickers
The camera detects the two embroidery positioning
stickers.
140
.
a
Note
• If either of the following messages appear,
rehoop the fabric so that the next pattern
and both the embroidery positioning
stickers are within the embroidery area as
indicated in the screen.
Press
to detect the embroidery
positioning stickers.
• If the machine detects that the next pattern
and the centers of the large circles of the
two embroidery positioning stickers do not
fit within the embroidering area, the
operation will be paused. Follow the on-
screen instructions to reposition the
embroidery positioning stickers. Refer to
"Changing the Position of a Sticker" on
page 142 to reposition the stickers.
• If the sticker peels off during this procedure,
the patterns cannot be connected. If this
occurs, restart the procedure from the
beginning.
• To quit positioning, press
.
Advertisement
Table of Contents
