Split Embroidery Patterns - Brother 888-M36 Operation Manual

Split embroidery patterns

Split embroidery patterns created with PE-DESIGN Ver.7 or
later, or PE-DESIGN NEXT can be embroidered. With split
embroidery patterns, embroidery designs larger than the
embroidery hoop are divided into multiple sections, which
combine to create a single pattern after each section is
embroidered.
For details on creating split embroidery patterns and for more
detailed embroidery instructions, refer to the Instruction
manual included with PE-DESIGN Ver.7 or later, or PE-
DESIGN NEXT.
Insert the USB flash drive containing the created split
a
embroidery pattern, and then select the split
embroidery pattern to be embroidered.
• For details, refer to "Retrieving embroidery patterns"
on page 36.
b Select section to be embroidered and press
• Select the sections in alphabetical order.
c Press and press
d Press the "Start/Stop" button to embroider the pattern
section.
e When embroidering is finished, the following screen
appears. Press .
 A screen appears so that a section of the split
embroidery pattern can be selected.
b
f Repeat steps through
remaining sections of the pattern.
.
.
e
to embroider the
Embroidering
2
31