Front Wheel - Honda Metropolitan CHF50 Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
FRONT WHEEL
REMOVAL
Remove the front brake arm adjusting nut and dis-
connect the brake cable from the brake arm.
Remove the joint pin from the brake arm.
Disconnect the speedometer cable from the brake
panel and remove the O-ring.
Loosen the front axle nut.
Support the scooter securely using a hoist or equiv-
alent and raise the front wheel off the ground.
Remove the front axle nut.
Remove the front axle out and remove the front
wheel.
Remove the side collar from the right side of the
wheel.
Remove the brake panel from the left side of the
wheel.
INSPECTION
AXLE
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.20 mm (0.008 in)
13-6