FINAL REDUCTION
SERVICE INFORMATION
GENERAL
• This section covers maintenance of the final reduction.
• These services can be done with the engine installed in the frame.
• When installing the driveshaft, be sure to use the special tool; position the special tool against the bearing inner race
and pull the driveshaft into the bearing.
SPECIFICATIONS
ITEM
Final reduction oil capacity (at disassembly)
Recommended final reduction oil
SPECIFICATIONS
0.1 liter (0.11 US qt, 0.09 Imp qt)
Hypoid gear oil #90
TORQUE VALUES
Final drive oil check bolt
Rear shock absorber mounting bolt
TOOLS
13N-m(1.3kgf-m,9lbf-ft)
26 N-m (2.7 kgf-m, 20 Ibf-ft)
Bearing remover weight
07741-0010201
or 07936-371020A
or 07936-3710200 (U.S.A. only)
Attachment, 32 x 35 mm
07746-0010100
Attachment, 37 x 40 mm
07746-0010200
Pilot, 12 mm
07746-0040200
Pilot, 17 mm
07746-0040400
Driver
07749-0010000
10-3