Honda Metropolitan CHF50 Service Manual page 228

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Right side only Install the rubber stopper into the bottom case as
shown.
Install the fork spring with the tightly wound end
facing down.
BOTTOM CASE
FORK SPRING
RUBBER STOPPER (RIGHT SIDE ONLY)
Install the rebound spring and guide bushing into
the fork tube.
Install the fork tube into the bottom case.
GUIDE BUSHING
Press the fork tube into the bottom case until the
snap ring groove is visible.
Install the snap ring into the groove in the bottom
case.
Apply grease to the fork tube as shown.
REBOUND SPRING
SNAP RING
Coat a new dust seal lip with grease and install it
into the bottom case using the special tool.
TOOLS:
Fork seal driver, 27 mm 07947-1180001
DUST SEAL
)/
13-16