FUEL SYSTEM
CARBURETOR DISASSEMBLY
NOTE:
• Do not remove the throttle position sensor
unless it is necessary to replace it or disassemble
the carburetor. If the sensor is removed, be sure
to reset the data (page 16-8).
Remove the followings from the carburetor.
-
Water hose
-
Throttle position sensor (page 16-9)
THROTTLE
POSITION SENSOR
WATER HOSE
STARTING ENRICHMENT (SE) VALVE
Remove the SE valve cover, screw, set plate and SE
valve.
COVER
SCREW
Inspect the valve and needle for stepped wear or
damage.
VALVE
NEEDLE
5-10