FRAME/BODY PANELS/EXHAUST SYSTEM
Remove the screws, clamp and rear combination
light unit.
Align the grooves Assembly is in the reverse order disassembly.
with the tabs.
SCREWS
CLAMP
REAR BODY\
COVER
REAR COMBINATION LIGHT UNIT
SIDE COVER
REMOVAL/INSTALLATION
Remove the two screws.
Remove the side cover as follows.
1. Pull out the rear side tabs on the outside of the
floor panel.
2. Remove the front tabs from the leg shield.
3. Move the side cover back and remove the four
tabs.
4. Remove the side cover.
Installation is in the reverse order of removal.
2-8