Successful Power-On And Automatic Boot - Digital Equipment MicroVAX 3600 Operation

shown in Figure 2-3. The boot device (in the example, DUAO) is listed after
number 2.
Figure 2-3: Successful Power-On and Automatic Boot
KA650-A VO4/0117
Performing normal system testa.
30. .29. .28. .27. .26. .25. .24. .23. .22. .21. .20. .19. .18. .17. .16. .15. .
14. .13. .12. .11. .10. .08. .08. .07. .06. .05. .04. .03. .
Loading system software.
2. .
-DIIAO
1. .0. .
MLO-1222-87
To direct the system to boot automatically from a specific device, put the
system into console mode and use the Set Boot command (SET BOOT device-
name). For example, "SET BOOT XQAO" causes the system to boot from the
Ethernet controller. To determine the name of the device that you want to
boot the system from, refer to Table 2-2.
2-6 MicroVAX 3600 VAXserver 3600/3602 Operation