Using The Setup Wizard - Conair FLX-128 User Manual

4 - 4 6 l O p e r a t i o n
U s i n g t h e S e t u p W i z a r d
The setup wizard is used for initial setup only.
1
From the main screen, select Setup.
2
From the Setup screen, select Advanced Setup.
3
Select Setup Wizard.
4
Login as "admin". The admin login is required to start the wizard and for some setup
screens. If the admin login times out, log back in as "admin".
5
Follow the steps outlined on each screen. Help is provided on the Setup Wizard and
on the individual Setup screens. Help is accessed by pressing the question mark button
located in the upper right corner of the screen.
6
Once all steps are completed, be sure to press "End Wizard".
i
NOTE:
• When the setup for a step is complete be sure to press the Return to Setup Wizard button located
on that setup screen. If navigation is made by closing the screen or opening another screen,
return to the Setup Wizard via Main Screen => Setup => Advanced Setup and then continue with
wizard.
• The setup wizard only guides the user to the screens needed to be setup. The help on that setup
screen provides information on how to setup.
• The setup wizard does not configure device time set points or individual configurations. Refer to
Operation section for configuring devices and pumps.
• The setup wizard does not include changing network connections or setting up remote alarm
boxes. Refer to Appendix for detailed instructions.