Unpacking The Boxes; U N P A C K I N G T H E B O X E S - Conair FLX-128 User Manual

i
NOTE: Additional
boxes may include
Remote I/O panel,
Remote Operator
Interface Enclosure(s),
Remote Alarm
Enclosure(s), and/or
Switch Enclosure(s)
depending upon what
was ordered.
3 - 2 l I n s t a l l a t i o n

U n p a c k i n g t h e B o x e s

The FLX loading control comes in one or more boxes, depending on options ordered. The
boxe(s) include a touch screen interface and other options as ordered:
CA U T I O N : L i f t i n g
To avoid personal injury or damage to the FLX, lift the equipment out of the box carefully.
A second person may be helpful in removing equipment from the box(es).
1
Carefully remove the FLX components from the shipping containers, and set
upright.
2
Remove all packing material, protective paper, tape, and plastic. Compare contents to
the shipping papers to ensure that you have all the parts.
3
Carefully inspect all components to make sure no damage occurred during shipping.
Check all wire terminal connections, bolts, and any other electrical connections, which
may have come loose during shipping.
4
Record serial numbers and specifications in the blanks provided on the back of the
User Guide's title page. This information will be helpful if you ever need service or parts.
5
You are now ready to begin installation.
for Installation.
See Installation Section entitled, Preparing