Before Beginning; B E F O R E B E G I N N I N G; A Few Words Of Caution; A Fe W Wo R D S O F C A U T I O N - Conair FLX-128 User Manual

6 - 2 l Tr o u b l e s h o o t i n g

B e f o r e B e g i n n i n g

You can avoid most problems by following the recommended installation, operation and
maintenance procedures outlined in this User Guide. If you have a problem, this section will
help you determine the cause and tell you how to fix it.
Before you begin troubleshooting:
J Find any wiring, parts, and assembly diagrams that were shipped with your equipment.
These are the best reference for correcting a problem. The diagrams will note any cus-
tom features or options not covered in this User Guide.
J Verify that you have all instructional materials related to the control. Additional details
about troubleshooting and repairing specific components are found in these materials.
J Check to make sure that you have the manuals for other equipment connected in the
system. Troubleshooting may require investigating other equipment attached to, or con-
nected with the control.

A Fe w Wo r d s o f C a u t i o n

WA R N I N G : I m p r o p e r i n s t a l l a t i o n , o p e r a t i o n o r
s e r v i c i n g m a y r e s u l t i n e q u i p m e n t d a m a g e o r
p e r s o n a l i n j u r y.
This equipment should only be installed, adjusted, and serviced by qualified technical
personnel who are familiar with the construction, operation, and potential hazards of this
type of machine.
All wiring, disconnects, and fuses should be installed and adjusted by qualified electrical
technicians in accordance with electrical codes in your region. Always maintain a safe
ground. Do not operate the equipment at power levels other than what is specified on the
machine serial tag and data plate.
WA R N I N G : E l e c t r i c a l h a z a r d
Before performing maintenance or repairs on this product, disconnect and lock out elec-
trical power sources to prevent injury from unexpected energization or start-up. Always
follow your company's internal lockout/tagout procedure for all maintenance and service.
( C o n t i n u e d )