Card Wire Numbers; C A R D W I R E N U M B E R S - Conair FLX-128 User Manual

C a r d W i r e N u m b e r s

The Card Wire Number screen provides on screen wire numbers for I/O cards and draw-
ing numbers. The screen is useful during installation and troubleshooting. The number of
I/O cards visible is based upon the cards installed.
To view a cards wire numbers: Press the card number in the rack (located on top) or
press the card description located on left side of the screen for input cards and right side
of the screen for output cards.
•
The Card selected will be highlighted green both in the rack and descriptions.
•
The wire numbers for the card will change according to the selection.
•
The Sheet number of the drawing set will change.
The Wire colors button can be used to open a screen to reference the colors and use of
the conductors used in Conair cable for connection.
i
NOTE: If a card is not
configured and selected,
the selection will default to
either the base input card
or base output card.
M a i n t e n a n c e l 5 - 5