Pump Screen - Conair FLX-128 User Manual

4 - 2 6 l O p e r a t i o n
P u m p S c r e e n
On this screen, all the devices including their number, name, and status being serviced by
the pump are shown. The loader status icons display their current status.
Icon Descriptions for more information.)
The Pump is enabled and disabled by pressing the Enabled/Disabled button under the pump
icon.
The Clean Cycle and Clean Cycle Time are configured from the Pump screen.
"Clean Cycle" is the number of individual load cycles the pump completes before the pump
automatically stops temporarily to let the dust collector empty.
"Clean Cycle Time" is the number of seconds the pump temporarily stops at the end of a
load cycle or when the Clean Cycle is triggered.
Pressing the Pump icon opens the Pump Detail window. The following is displayed:
•
Pump Starts – The number of times the pump is commanded to turn on.
•
Duty Cycle - The percentage the pump is running while enabled.
•
Pressing Left arrow scrolls to the previous pump and pressing the Right arrow scrolls to
the next pump.
•
If there are more than 16 loaders attached to the pump, press the Devices 17+ button to
view more loaders attached to pump.
A "B" in the upper right hand corner of the Pump icon indicates the pump is currently
assigned to the backup pump.
(See Operation:
( C o n t i n u e d )