Changing Network Addresses For Flx Controller Plc And/Or - Conair FLX-128 User Manual

C h a n g i n g N e t w o r k A d d r e s s e s f o r F L X
C o n t r o l l e r P L C a n d / o r F L X R e m o t e I / O
C o n t r o l l e r ( Wa g o 8 8 0 )
5
From the Navigation menu, select TCP/IP.
6
When prompted for User name enter "user"
and password "user".
7
Enter the new network addresses (IP-Address, Subnet
Mask, Gateway).
8
Once the new addresses are entered, press the Submit
button.
9
When prompted for User name enter "user" and
password "user".
10
Close Internet Explorer.
11
Cycle power to the FLX controller (The TCP/IP
parameters are stored in an EEPROM and changes
will take effect after the next software or hardware
reset.)
i
NOTE: The operator interface communication path to controller
(PLC) will have to be changed in all operator interfaces.
( C o n t i n u e d )
I n s t a l l a t i o n l 3 - 1 7