I n d i v i d u a l D e v i c e S c r e e n
On this screen, the loader including the number, name, and status is displayed. The sta-
tus can be deciphered by the color of the device icon's background.
A "P" in the upper right hand corner of the device icon indicates the device is a priority
and will be serviced by the pump before the others.
Overview of screen
•
The Remaining Cycle Time is visible when the loader is currently being serviced. The
time is the amount of time the device requires to be serviced.
•
The Detailed Status displays a descriptive status of the current state of the loader.
•
Pressing the Left arrow navigates to the previous loader and pressing the Right arrow
navigates to the next loader.
Load Time
The number of seconds (0-300) the receiver loads material.
Discharge Time
The number of seconds (1-300) the receiver will discharge material into a vessel before
the next load cycle begins. If the time is left at 0, the program will automatically set it to
1.
i
NOTE: If the screen was
navigated from the Devices
screen then the
previous/next device would
be the previous/next in
sequential order. If the
screen was navigated from
the Pump screen, then the
previous/next device would
be the previous/next on that
pump.
( c o n t i n u e d )
O p e r a t i o n l
4 - 3 1