G r a n u l a t o r ( G r i n d e r ) S c r e e n
On this screen, the granulator including the number, name, and status is displayed. The sta-
tus is indicated by the icon.
(See Operation: Icon Descriptions)
Overview of screen
•
The MSLoader Load Time is displayed as a reference. The time is changed from the
Multi-Source Loader screen.
Purge Time
When Purge is configured, the Purge time will be visible.
Purge Time is the number of seconds (0-300) that the vacuum continues to pull material
through the line after a purge valve closes to the material source. This clears the line of
material.
Granulator Maintenance Screen
The Maintenance screen displays the current cycle
counts of valves. The PM setpoint for each device is
shown. The PM setpoint is configured from the
PM/Maint Setup screen (accessed from the Setup
screen.)
•
Number of Load Cycles
•
Number of Purge Cycles
An alarm message can be displayed to alert mainte-
nance personnel preventative maintenance is required.
This feature is Enabled/Disabled from the Setup screen.
O p e r a t i o n l
4 - 4 3