U s i n g t h e S e t u p W i z a r d
Using the Setup Wizard is the most simple way to complete the initial setup of your FLX
system. Use the following procedure to complete the initial setup process:
1 Provide power to the FLX.
2 Wait for the control to initialize. The control
will check the I/O connected during the boot-
up and initialization process. This will take up
to 10 seconds.
3 From the main screen, select "Setup".
4 From the Setup screen, select "Advanced Setup".
5 From the Advanced Setup screen, select "Setup Wizard".
6 From the Initial Setup Wizard
screen, click "Start Wizard". The
setup wizard will guide you
through all the initial steps of set-
ting up your FLX.
TIP: If at any point of the Setup
Wizard you are unsure what to do,
click on the Help button at the top of
the screen. Each screen has a
detailed help page to aide in deter-
mining what settings to enter.
TIP: You can use the "Return to
Setup Wizard" at any time to return
to the initial Setup Wizard screen.
7 Once you have completed all the parts of the Setup Wizard, press "End Wizard".
I n s t a l l a t i o n l
3 - 9