Connecting The Main Power Source; C O N N E C T I N G T H E M A I N Po W E R S O U R C E - Conair FLX-128 User Manual

IMPORTANT: Always refer to
the wiring diagrams that came
with your FLX before making
electrical connections. The
diagrams show the most accu-
rate electrical component
information.
3 - 6 l I n s t a l l a t i o n

C o n n e c t i n g t h e M a i n Po w e r S o u r c e

WA R N I N G : E l e c t r i c a l h a z a r d
Before performing maintenance or repairs on this product, disconnect and lock out
electrical power sources to prevent injury from unexpected energization or start-up.
Always follow your company's internal lockout/tagout procedure for all maintenance
and service.
WA R N I N G : I m p r o p e r i n s t a l l a t i o n , o p e r a t i o n , o r s e r v -
i c i n g m a y r e s u l t i n e q u i p m e n t d a m a g e o r p e r s o n a l
i n j u r y.
This equipment should only be installed, adjusted, and serviced by qualified technical
personnel who are familiar with the construction, operation, and potential hazards of
this type of machine.
All wiring, disconnects, and fuses should be installed by qualified electrical technicians
in accordance with electrical codes in your region. Always maintain a safe ground. Do
not operate the equipment at power levels other than what is specified on the machine
serial tag and data plate.
The FLX base unit and optional panels are equipped with three-prong plugs and power
cords.
1
Plug the power cords into grounded 120 VAC outlets
rated for at least 16 Amp service.
2
Verify that the base unit is grounded.