Help Screens; Available Languages; Security Levels - Conair FLX-128 User Manual

H e l p

Help screens

Help screens are available from most screens. The help varies from general overview to
detailed instructions. If Help is available for a screen, a question mark button will be pres-
ent in the upper right corner on the green title bar. Press this button to access the help infor-
mation.
L a n g u a g e s

Available languages

The current available FLX Control languages are English and Spanish. By default, screens
are displayed in English. The language can be switched on any Help screen. Buttons are
provided to select either English or Spanish.
S e c u r i t y

Security levels

Operator actions and screens can be password protected. There are seven levels of pro-
grammable password protection. Operator and maintenance security levels can be cus-
tomized.
User names and default passwords
Task/Operation
Enable / Disable Devices and Pumps
Change Material Source device is loading from
Change Device Load, Discharge, Purge Time Setpoints
Change Ratio Setpoints (Regrind Time, Ratio Cycles)
Disable All Devices and Pumps / Ack All Alarms
Assign Backup Pump / Test I/O / Clear Alarm History
Configure Devices
Change Date & Time / Calibrate Touchscreen / PM Configure
Change Names / Device & Pump Setup / Ratio System
Change Passwords / Setup Security Levels
I/O Config / Network Connection / Remote Alarm / FIFO reset
i
NOTE: "default" has no security
level and has no password.
Default Security Level
oper1
oper2
oper3
oper3
maint1
maint2
maint2
maint2
maint3
admin (not configurable)
admin (not configurable)
O p e r a t i o n l 4 - 1 5