Configuring The I/O - Conair FLX-128 User Manual

i
NOTE: If you have utilized
the setup wizard, you have
already configured the I/O.
See Installation: Using the
Setup Wizard for more
information.
i
NOTE: Configuration
options are based upon I/O
expansion available and
prerequisites.
3 - 1 0 l I n s t a l l a t i o n
C o n f i g u r i n g t h e I / O
1 Provide power to the FLX.
2 Wait for the control to initialize. The control
will check the I/O connected during the boot-
up and initialization process. This will take up
to 10 seconds.
3 From the main screen, select "Setup".
4 From the Setup screen, select "Advanced Setup".
5 From the Advanced Setup screen, select "I/O Configure".
6 From the I/O Configure screen, login as admin. Default password
is admin. (If this step is necessary on your control, a popup window will prompt you to
login.)
7 Select "Configure I/O".
8 From the Configure I/O screen, press the
INPUT or OUTPUT card to be configured.
9 From the card configuration screen, select
how the card will be configured.
10 Press "Accept" to accept changes, or the Back button to disregard.
11 Repeat steps 8 and 9 until all cards are configured.
( C o n t i n u e d )