Insert A Cryptocard Into The Recorder; The Cryptocard And Its Pin And Puc Code - Vidicode SD2750 Manual

12.2

Insert a CryptoCard into the recorder

Insert the CryptoCard into the Call Recorder Single Digital as shown in
the figure below.
12.3

The CryptoCard and its PIN and PUC code

The CryptoCard is supplied with a PUC code and a PIN code. The PIN
code is a four-digit code and is requested to enable playback of
recordings. The PUC code is a twelve-digit code and is used only when
the card has been disabled. The PIN code can be changed with the
recorder. This can be done only when the Use CryptoCard function has
been enabled..
Press the
•
Press NEXT NEXT several times. NEXT NEXT
•
Change Card Code
NEXT
Press CHANGE CHANGE CHANGE to change the card code. CHANGE
•
Call Recorder Single Digital manual ©Vidicode 2011-2014
function key.
CHANGE STOP
63