Vidicode SD2750 Manual page 45

Press the
•
Speak the message into the microphone.
•
Press the
•
Press the
•
Press
•
the below shown dialogue box will open
or
Press
•
Fill in the required IP address and FTP username and password,
•
then click 'OK'
The Notification message is now transferred to the Call Recorder.
Call Recorder Single Digital manual ©Vidicode 2011-2014
key to start recording the message.
key when you are finished.
key to listen to the recorded message.
to save the message to the Call Recorder,
. If you want to try again.
45