Gmt Correction; Telnet - Vidicode SD2750 Manual

Press STORE STORE to save the NTP server port number. STORE STORE
•
Press NEXT NEXT NEXT to save and move on to the next menu item. NEXT
•
11.19

GMT correction

GMT correction GMT correction property is used to identify the time zone. NTP server GMT correction GMT correction
normally issues GMT (also know as UTC). GMT correction can be set in
half hours from -15:00 to + 15:00.
GMT correction: 00:00
NEXT
Press CHANGE CHANGE to set GMT correction. Keep pressing CHANGE
CHANGE CHANGE
•
increase the correction. It will start with + 1:00, keep pressing
CHANGE to increase. After + 15:00 there will appear - 15:00. CHANGE
CHANGE CHANGE
Press NEXT NEXT to save and move on to the next menu item. NEXT NEXT
•
GMT correction refers to winter time. Summertime / Daylight saving
time and Wintertime are corrected automatically.
11.20

Telnet

Telnet can be used to log on to the recorder and configure it from your
PC remotely. If required contact your supplier for more details.
TelNet active: No
NEXT
Press CHANGE CHANGE to enable TelNet.
CHANGE CHANGE
•
TelNet active: Yes
NEXT
Press NEXT NEXT to save and move on to the next menu item. NEXT NEXT
•
Call Recorder Single Digital manual ©Vidicode 2011-2014
- CHANGE +
CHANGE
CHANGE
STOP
CHANGE to
CHANGE CHANGE
STOP
STOP
59