Ntp Server; Ntp Port - Vidicode SD2750 Manual

11.17

NTP server

If it is possible that on your network the Call Recorder has access to an
NTP (Network Time Protocol) server, it is recommended that you enable
it because it will give the recorder an accurate time reference.
NTP srv:
NEXT
Press CHANGE CHANGE to enter the NTP server address.
CHANGE CHANGE
•
NTP srv:
STORE
Use the numerical keys to enter the NTP server. Either an IP number or IP
name are allowed. In case an IP name is used the DNS server needs to be
configured.
Press STORE STORE to save the NTP server address. STORE STORE
•
Press NEXT NEXT to save and move on to the next menu item.
NEXT NEXT
•
11.18

NTP port

NTP port is the port number through which the recorder as a client can
connect to the NTP server. The NTP port is default set to 123. Consult the
network manager for the port number.
NTP port:
NEXT
Press CHANGE CHANGE to change the NTP server port number.
CHANGE CHANGE
•
NTP port:
Use the numerical keys to enter the NTP port number.
58 Call Recorder Single Digital manual ©Vidicode 2011-2014
0.0.0.0
CHANGE
0.0.0.0»
<< CLEAR CANCEL
123
CHANGE
»
STOP
STOP
CANCEL