Ntp Server; Ntp Port - Vidicode 010.01830 Manual

Press NEXT NEXT NEXT to save and move on to the next menu item. NEXT
•
9.17

NTP server

If it is possible that on your network the Call Recorder has access to an
NTP (Network Time Protocol) server, it is recommended that you enable
it because it will give the recorder an accurate time reference.
NTP srv:
NEXT
Press CHANGE CHANGE to enter the DNS server.
CHANGE CHANGE
•
NTP srv:
STORE
Use the numerical keys to enter the NTP server.
Press STORE STORE to save the DNS server.
STORE STORE
•
Press NEXT NEXT NEXT to save and move on to the next menu item. NEXT
•
9.18

NTP port

NTP port is the port number through which the recorder as a client can
connect to the NTP server. The NTP port is default set to 123. Consult the
network manager for the port number.
NTP port:
NEXT
Press CHANGE CHANGE to change the NTP server port number. CHANGE CHANGE
•
64 Call Recorder PRI manual © 2009-2014 Vidicode®
0.0.0.0
CHANGE
»00.000.000.000
123
CHANGE
STOP
CANCEL
STOP