Table of Contents
Advertisement
WARRANTY
Mountain Models guarantees this kit to be free from any defects in both material and workmanship at the
time of purchase. This warranty does not cover ANY components or parts damaged by use or modification.
In no case shall Mountain Model's liability exceed the original cost of the purchased kit. Mountain Models
reserves the right to modify or change this warranty without notice.
LIABILITY RELEASE
In that Mountain Models has no control over the final assembly or material used for final assembly, no
liability shall be assumed or accepted for any damage resulting from the use by the user of the final user-
assembled product. By the act of using the user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is
advised to return the kit immediately in new and unused condition.
THIS PRODUCT IS NOT INTENDED FOR CHILDREN 12 YEARS OF AGE OR YOUNGER.
WARNING: This product may contain chemicals known to the State of California to cause cancer and or
birth defects or other reproductive harm.
PRODUCT SUPPORT
This product has been designed to function properly and perform as advertised with the SUGGESTED power
system, speed control, and servos, as described in advertisements and in this manual. We do NOT support,
nor can Mountain Models assist in determining the suitability or use with any other electronics or hardware
not recommended by Mountain Models.
For the proper electronics to complete this model, replacement parts, and product assembly questions,
please contact Mountain Models online at
www.MountainModels.com
Thank you for purchasing the Mountain Models HiperBipe. Our kit is a 1/8 scale model of the Sorrel SNS-7
Hiperbipe. Our model is a parkflyer model designed to give you a great scale model that is very unique,
aerobatic, and easy to build.
The HiperBipe can slow down greatly for easy flying and landings, and has plenty of power for any
aerobatic maneuver you can put her through.
The HiperBipe was designed using a state of the art 3D CAD package, to allow for exceptional interlocking
parts design and fit. 3D design also allows us to provide clearer assembly images, without having to use
photos.
The HiperBipe is built from self-jigging interlocking laser cut balsa and plywood parts. It's like a 3D jigsaw puzzle
with instructions. If the instructions are read before hand and followed during the build, the HiperBipe can be built
up and ready to cover in only a few evenings.
We think you'll like the HiperBipe and look forward to any feedback you might have.
Thank you,
Brian Eberwein
Mountain Models
2935 N Lynndale Drive
Appleton, WI 54914
www.mountainmodels.com
Phone: 920-840-6036
2
Advertisement
Table of Contents
