Advertisement
WARRANTY
Mountain Models guarantees this kit to be free from any defects in both material and workmanship at the
time of purchase. This warranty does not cover ANY components or parts damaged by use or modification.
In no case shall Mountain Model's liability exceed the original cost of the purchased kit. Mountain Models
reserves the right to modify or change this warranty without notice.
LIABILITY RELEASE
In that Mountain Models has no control over the final assembly or material used for final assembly, no
liability shall be assumed or accepted for any damage resulting from the use by the user of the final user-
assembled product. By the act of using the user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated with the use of this product, the buyer is
advised to return the kit immediately in new and unused condition.
THIS PRODUCT IS NOT INTENDED FOR CHILDREN 12 YEARS OF AGE OR YOUNGER.
WARNING: This product may contain chemicals known to the State of California to cause cancer and or
birth defects or other reproductive harm.
PRODUCT SUPPORT
This product has been designed to function properly and perform as advertised with the SUGGESTED power
system, speed control, and servos, as described in advertisements and in this manual. We do NOT support,
nor can Mountain Models assist in determining the suitability or use with any other electronics or hardware
not recommended by Mountain Models.
For the proper electronics to complete this model, replacement parts, and product assembly questions,
please contact Mountain Models online at
www.MountainModels.com
Thank you for purchasing the Mountain Models Tom-E-Boy™ 150. The Tom-E-Boy™ 150 is a small model
designed with influence from the famous Vic Smeed Tomboy, to bring back that nostalgic feeling of
yesteryear, in a small field electric package. The 30 inch Tom-E-Boy™ 150 is super easy to build and easy
enough for a beginner to learn how to fly with some friendly help.
The Tom-E-Boy™ 150 was designed using a state of the art 3D CAD package, to allow for exceptional
interlocking parts design and fit. 3D design also allows us to provide clearer assembly images, without
having to use photos.
The Tom-E-Boy™ 150 is built from self-jigging interlocking laser cut balsa and plywood parts. It's like a 3D jigsaw
puzzle with instructions. Although not needed for building, full size plans are included for reference. If the
instructions are read before hand and followed during the build, the Tom-E-Boy™ 150 can be built up and ready to
fly in only 2 to 4 evenings.
We think you'll like the Tom-E-Boy™ 150 and look forward to any feedback you might have.
Thank you,
Brian Eberwein
Mountain Models
2935 N Lynndale Drive
Appleton, WI 54914
www.mountainmodels.com
Phone: 920.840.6036
2
Advertisement
