Mountain Models HiperBipe Instruction Manual page 20

1
53. Press " Lt Ply MM2 and MM3 onto the
8
Plywood MM4, but do NOT glue yet.
1
54. Press the " Lt Ply MM1in place, as shown.
8
55. Make sure parts are fully inserted and secure
with thin CA.
56. Glue MM5 in place, with thick CA.
1
"
16
57. Insert 4-40 T-Nuts from behind, as shown. Use
a washer on a 4-40 x
it into the T-Nut to pull the T-Nut in place.
3
" cap-head screw and screw
8
20