Table of Contents
Advertisement
15. Insert the crutch
assembly into F21 with the
plywood doubler facing to
the OUTSIDE. It helps to lay
the doubler on the table and
press the crutch into F21.
Then, pick it up and press
the doubler fully onto the
crutch. So it a bit at a time
and do not press on any area
that does not have a former
or crutch behind it. Do NOT
glue anything yet.
1
16. Press the
" Lt Ply F6
8
and F10 assembly into the
fuselage side doubler, as
shown. The T-Nuts on F10
are to the FRONT of the
plane. Do NOT glue them in
yet.
8
Advertisement
Table of Contents
