Mountain Models HiperBipe Instruction Manual page 16

35. Slide the hatch in place, and
secure in place with 2 of the #2x
1
" screws. Do NOT overtighten
4
the screws. Take out the screws,
remove the hatch, and reinforce
the threaded holes with thin CA.
36. Glue the
onto the
making sure to line up the slots
in the bottom. Make a RIGHT
and LEFT version, as shown in
the image.
3
37. Glue the " Balsa FH1 and FH1a parts together,
32
using thin CA.
1
38. Glue the " Ply FH3 and
32
together, using thick CA and
parts.
39. Dry assemble FH1, FH2, FH3, and the FH6/FH9
assembly with the plywood on FH9 facing OUTSIDE.
3
" balsa FH6 parts
32
1
" plywood FH9 parts,
16
1
" Balsa FH3 parts
16
1
" dowel to align the
8
16