3. Glue the 3/32" Balsa F14
parts together to form F14,
using thin CA, as shown
below.
4. Glue in the #4 washers,
flush with the TOP of F14.
5. Press F14 into F3, but do
NOT glue yet.
FUSELAGE ASSEMBLY:
1
1. Slide the
" Lt. Ply F3
8
(with text facing
FORWARD) into the Lt. Ply
crutch, F1 (with text facing
UP), rotating it into place.
Do NOT glue it yet.
2. Press the crutch into the
1/16" plywood F4, with the
text of F4 facing
FORWARD. Do NOT glue
it yet.
5