Interrupt Push Buttons (Sw4 And Sw5); Reset Push Button (Sw3) - Analog Devices ADSP-TS201S EZ-KIT Lite Manual

Table of Contents

Interrupt Push Buttons (SW4 and SW5)

Two push buttons,

push buttons connect to the processor's interrupt pins. The push buttons

are active low and, when pressed, send a low (

"Interrupt Pins" on page 1-11

interrupts.

Table 2-20

switches.

Table 2-20. Interrupt Push Buttons

Interrupt Pin

IRQ0_A

IRQ0_B

The

push button,

RESET

interface after it has been configured.

ADSP-TS201S EZ-KIT Lite Evaluation System Manual

ADSP-TS201S EZ-KIT Lite Hardware Reference

and

, are provided for user interrupts. The

SW4

SW5

for more information on how to use the

shows the interrupt signals and corresponding

Push Button Reference Designator

SW4

SW5

, resets all ICs on the board, except the USB

SW3

) to the processor. Refer to

2-19

Table of Contents

Do you have a question about the ADSP-TS201S EZ-KIT Lite and is the answer not in the manual?