Analog Devices ADSP-TS101S EZ-KIT Lite Manual
  1. Manuals
  2. Brands
  3. Analog Devices Manuals
  4. Motherboard
  5. ADSP-TS101S EZ-KIT Lite
  6. Manual
Analog Devices ADSP-TS101S EZ-KIT Lite Manual

Analog Devices ADSP-TS101S EZ-KIT Lite Manual

Evaluation system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
ADSP-TS101S EZ-KIT Lite
Evaluation System Manual
Revision 2.1, April 2006
Part Number
82-000635-01
Analog Devices, Inc.
a
One Technology Way
Norwood, Mass. 02062-9106

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADSP-TS101S EZ-KIT Lite and is the answer not in the manual?

Questions and answers

Related Manuals for Analog Devices ADSP-TS101S EZ-KIT Lite

Summary of Contents for Analog Devices ADSP-TS101S EZ-KIT Lite

  • Page 1 ® ADSP-TS101S EZ-KIT Lite Evaluation System Manual Revision 2.1, April 2006 Part Number 82-000635-01 Analog Devices, Inc. One Technology Way Norwood, Mass. 02062-9106...
  • Page 2 Analog Devices or from an authorized dealer. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use;...
  • Page 3 Regulatory Compliance The ADSP-TS101S EZ-KIT Lite evaluation system has been certified to comply with the essential requirements of the European EMC directive 89/336/EEC (inclusive 93/68/EEC) and, therefore, carries the “CE” mark. The ADSP-TS101S EZ-KIT Lite evaluation system had been appended to Analog Devices Development Tools Technical Construction File refer- enced “DSPTOOLS1”...

  • Page 5: Table Of Contents

    Accessing Documentation From VisualDSP++ ....xviii Accessing Documentation From Windows ......xviii Accessing Documentation From Web ........xix Printed Manuals ............... xix VisualDSP++ Documentation Set ......... xix Hardware Tools Manuals ............xix Processor Manuals ..............xx ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 6 Flash Memory ................1-11 Audio Interface ................1-11 Example Programs ..............1-12 Flash Programmer Utility ............1-13 Handling ADSP-TS101S EZ-KIT Lite Flash Memory .... 1-13 ADSP-TS101S EZ-KIT LITE HARDWARE REFERENCE System Architecture ..............2-2 External Port ................2-3 Expansion Interface ..............2-3 JTAG Emulation Port .............
  • Page 7 Expansion Interface (P11–13) ..........2-14 Link Ports (P7–10) ..............2-14 Power Connector (P14) ............2-15 Power Supply Specifications ............2-15 ADSP-TS101S EZ-KIT LITE BILL OF MATERIALS ADSP-TS101S EZ-KIT LITE SCHEMATIC Title Page ..................B-1 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 8 Audio Interface ................B-5 Audio In Amplifiers ..............B-6 Audio Out Amplifiers ..............B-7 Push Buttons and LEDs ..............B-8 Configuration ................B-9 Expansion Connectors ..............B-10 Power Supply ................B-11 Caps ................... B-12 INDEX viii ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 9 PREFACE ® Thank you for purchasing the ADSP-TS101S EZ-KIT Lite , Analog ® Devices (ADI) evaluation system for TigerSHARC floating-point embedded processors. The TigerSHARC processor is a static super scalar (SSS) architecture tar- geted at software-defined radio applications. In these wireless...
  • Page 10 ADSP-TS101S EZ-KIT Lite provides example programs to demonstrate the capabilities of the evaluation board. The ADSP-TS101S EZ-KIT Lite installation is part of the Visu- alDSP++ installation. The EZ-KIT Lite is a licensed product that offers an unrestricted evaluation license for the first 90 days. For details about evaluation license restrictions after the 90 days, refer “Evaluation License Restrictions”...
  • Page 11 Preface • Analog Devices AD1854 96 kHz digital-to-analog converter (DAC) Line-out 3.5 mm stereo jack • SDRAM memory 32 MB (4M byte x 64) DIMM • Flash memory (544K x 8) 512K main flash memory 32K secondary flash memory • Interface connectors...

  • Page 12: Purpose Of This Manual

    Intended Audience The primary audience for this manual is a programmer who is familiar with Analog Devices processors. This manual assumes that the audience has a working knowledge of the appropriate processor architecture and instruction set. Programmers who are unfamiliar with Analog Devices...

  • Page 13: Manual Contents

    CD. Alternatively, the schematic Manuals can be found on the Analog Devices Web site: www.analog.com/processors What’s New in This Manual This revision of the ADSP-TS101S EZ-KIT Lite Evaluation System Manual has been updated for VisualDSP++ 4.5. ADSP-TS101S EZ-KIT Lite Evaluation System Manual xiii...

  • Page 14: Technical Or Customer Support

    Technical or Customer Support Technical or Customer Support You can reach Analog Devices, Inc. Customer Support in the following ways: • Visit the Embedded Processing and DSP products Web site at http://www.analog.com/processors/technicalSupport • E-mail tools questions to processor.tools.support@analog.com • E-mail processor questions to processor.support@analog.com (World wide support)

  • Page 15: Product Information

    MyAnalog.com MyAnalog.com is a free feature of the Analog Devices Web site that allows customization of a Web page to display only the latest information on products you are interested in. You can also choose to receive weekly e-mail notifications containing updates to the Web pages that meet your interests.

  • Page 16: Related Documents

    Product Information You may also obtain additional information about Analog Devices and its products in any of the following ways. • E-mail questions or requests for information to processor.support@analog.com (World wide support) processor.europe@analog.com (Europe support) processor.china@analog.com (China support) • Fax questions or requests for information to...

  • Page 17: Online Technical Documentation

    .pdf folder on the VisualDSP++ installation CD. Docs Each documentation file type is described as follows. File Description Help system files and manuals in Help format .chm ADSP-TS101S EZ-KIT Lite Evaluation System Manual xvii...

  • Page 18: Accessing Documentation From Visualdsp

    To view VisualDSP++ Help, click on the Help menu item or go to the Windows task bar and navigate to the VisualDSP++ documentation via the Start menu. To view ADSP-TS101S EZ-KIT Lite Help, which is part of the Visu- alDSP++ Help system, use the Contents or Search tab of the Help window.

  • Page 19: Accessing Documentation From Web

    To purchase VisualDSP++ manuals, call 1-603-883-2430. The manuals may be purchased only as a kit. If you do not have an account with Analog Devices, you are referred to Analog Devices distributors. For information on our distributors, log onto http://www.analog.com/salesdir/continent.asp...

  • Page 20: Processor Manuals

    1-800-ANALOGD (1-800-262-5643); they also can be downloaded from the Web site. To have a data sheet faxed to you, call the Analog Devices Faxback System at 1-800-446-6212. Follow the prompts and a list of data sheet code numbers will be faxed to you. If the data sheet you want is not listed, check for it on the Web site.

  • Page 21: Notation Conventions

    A Warning identifies conditions or inappropriate usage of the product that could lead to conditions that are potentially hazardous for the devices users. In the online version of this book, the word Warning appears instead of this symbol. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 22 Notation Conventions Additional conventions, which apply only to specific chapters, may appear throughout this document. xxii ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 23: Using Adsp-Ts101S Ez-Kit Lite

    1 USING ADSP-TS101S EZ-KIT LITE This chapter provides specific information to assist you with development of programs for the ADSP-TS101S EZ-KIT Lite evaluation system. The information appears in the following sections. • “Package Contents” on page 1-2 Lists the items contained in your ADSP-TS101S EZ-KIT Lite package.

  • Page 24: Package Contents

    For detailed information about programming the ADSP-TS101S Tiger- SHARC processor, see the documents referred to as “Related Documents”. Package Contents Your ADSP-TS101S EZ-KIT Lite evaluation system package contains the following items. • ADSP-TS101S EZ-KIT Lite board ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 25: Default Configuration

    Store unused EZ-KIT Lite boards in the protective shipping package. The ADSP-TS101S EZ-KIT Lite board is designed to run outside your personal computer as a stand-alone unit. You do not have to open your computer case.
  • Page 26 Figure 1-1 shows the default DIP switch, connector locations, and LEDs used in installation. Confirm that your board is set up in the default configuration before using the board. Figure 1-1. EZ-KIT Lite Hardware Setup ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 27: Installation And Session Startup

    New Session from the Session List dialog box. 4. The Select Processor page of the wizard appears on the screen. Ensure TigerSHARC is selected in Processor family. In Choose a target processor, select ADSP-TS101. Click Next. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 28 To disconnect from a session, click the disconnect button or select Session –> Disconnect from Target. To delete a session, select Session –> Session List. Select the ses- sion name from the list and click Delete. Click OK. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 29: Evaluation License Restrictions

    ADSP-TS101 TigerSHARC Processor Hardware Reference. The ADSP-TS101S EZ-KIT Lite board contains 544K x 8-bits of external flash memory. The memory is separated into two sections. One section contains 512K bytes of main flash memory, and the other section contains 32K bytes of secondary flash memory.

  • Page 30: Sdram Interface

    1200 cycles (every 600 cycles on revision 1.2 boards), pre-charge to RAS of three cycles, RAS to pre-charge of four cycles, and init sequence is MRS cycle follows refresh. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 31: Programmable Flag Pins

    If the flag is configured for input, the value on the flag pin SQCTL is read from the register. Programmable flags are summarized in SQSTAT Table 1-2. For more information on configuring the programmable flag pins, see the ADSP-TS101 TigerSHARC Processor Hardware Reference. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 32: Interrupt Pins

    IRQ0_A IRQ0 ply feedback for program execution. For instance, you IRQ0_B can write your code to perform a different function when an interrupt is detected. 1-10 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 33: Flash Memory

    FPGA. Once DSP_A the audio interface has been enabled, the audio data can be transferred to and from the processor by generating a cycle. The audio data inter- DMAR0 ADSP-TS101S EZ-KIT Lite Evaluation System Manual 1-11...

  • Page 34: Example Programs

    Example Programs Example programs are provided with the ADSP-TS101S EZ-KIT Lite to demonstrate various capabilities of the evaluation board. These programs are installed with the EZ-KIT Lite software in the …\TS\Exam-...

  • Page 35: Flash Programmer Utility

    Using ADSP-TS101S EZ-KIT Lite Flash Programmer Utility The ADSP-TS101S EZ-KIT Lite evaluation system includes a Flash Pro- grammer utility. The utility allows you to program the flash memory on the EZ-KIT Lite. The Flash Programmer is installed with VisualDSP++. Once the utility is installed, it is accessible from the Tools pull-down menu.
  • Page 36 Flash Programmer Utility 1-14 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 37: Adsp-Ts101S Ez-Kit Lite Hardware Reference

    This chapter describes the hardware design of the ADSP-TS101S EZ-KIT Lite board. The following topics are covered. • “System Architecture” on page 2-2 Describes the configuration of the ADSP-TS101S EZ-KIT Lite evaluation board and explains how the board components interface with the processor. •...

  • Page 38: System Architecture

    The speed at which the core operates is determined by the settings of the processor switch . For more information, see “Clock Mode Settings” on page 2-7. By default, the processor core runs at 250 MHz (83.3 MHz x 3). ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 39: External Port

    Additional circuitry can also add extra loading to signals, decreasing their maximum effective speed. Analog Devices does not support and is not responsible for the effects of additional circuitry. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 40: Jtag Emulation Port

    14-pin header. See “JTAG (P5)” on page 2-13 for more infor- mation about the JTAG connector. To learn more about available emulators, contact Analog Devices as described in “Processor Product Information”. DIP Switch Settings This section describes the function of the DIP switch, Figure 2-2 shows the location of the switch.

  • Page 41: Control Impedance Selection

    1 Default settings Drive Strength Selection Positions 6 through 4 ( ) of determine the digital drive strength. Refer to the ADSP-TS101S TigerSHARC processor data sheet at http://www.analog.com/Uploaded- for more Files/Data_Sheets/40196385778873ADSP_TS101S_b.pdf information. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 42: Boot Mode Settings

    Refer to the ADSP-TS101S TigerSHARC processor data sheet at http://www.analog.com/Uploaded- for more Files/Data_Sheets/40196385778873ADSP_TS101S_b.pdf information. Table 2-4. Boot Mode Settings SW7 Position 7 Boot Mode EPROM BOOT External Boot 1 Default settings ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 43: Interrupt Enable Settings

    For more infor- mation on the clock modes, see the ADSP-TS101S processor data sheet at http://www.analog.com/Uploaded- Files/Data_Sheets/40196385778873ADSP_TS101S_b.pdf Table 2-6. Clock Mode Settings SW7 Position 11 SW7 Position 10 SW7 Position 9 Ratio ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 44: Leds And Push Buttons

    When is lit, the USB interface is being reset. The USB interface is LED2 reset only when it is not configured. Once the USB interface has been configured, you must remove power to reset. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 45: Power Led (Led3)

    ) are being LED9 reset. The USB interface resets the ADSP-TS101S processor during USB communication initialization. Power LED (LED3) The green LED, , indicates that power is being properly supplied to LED3 the board. ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 46: Flag Leds (Led4-7)

    ) to the processor. Refer to “SDRAM Interface” on page 1-8 more information on how to use the flags when programming the proces- sor. Table 2-8 shows the flag signals and the corresponding switches. 2-10 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 47: Interrupt Push Buttons (Sw3 And Sw6)

    Table 2-9 shows the interrupt signals and corresponding switches. Table 2-9. Interrupt Push Buttons FLAG Pin Push Button Reference FLAG Pin Push Button Reference Designator Designator IRQ0_A IRQ0_B ADSP-TS101S EZ-KIT Lite Evaluation System Manual 2-11...

  • Page 48: Connectors

    The locations of the connectors are shown Figure 2-4. Figure 2-4. Connector Locations Audio (P2 and P3) There are two 3.5 mm stereo audio jacks. Part Description Manufacturer Part Number 3.5 mm stereo jack SHOGYO SJ-0359AM-5 2-12 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 49: Usb (P4)

    When an emulator is connected to the JTAG header, the USB debug interface is disabled. When using an emulator with the EZ-KIT Lite board, follow the connection instructions provided with the emulator. ADSP-TS101S EZ-KIT Lite Evaluation System Manual 2-13...

  • Page 50: Expansion Interface (P11-13)

    TransTech DSP (TTC44-30). The associated Gore Coaxial cable (DXN2132) should also be revised for the proper number of strands to include connector pins 12 and 13. 2-14 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

  • Page 51: Power Connector (P14)

    Power Supply Specifications The power connector supplies DC power to the EZ-KIT Lite board. Table 2-10 shows the power connector pinout. Table 2-10. Power Connectors Terminal Connection Center pin +7.5 VDC@2 amps Outer ring ADSP-TS101S EZ-KIT Lite Evaluation System Manual 2-15...
  • Page 52 Power Supply Specifications 2-16 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 53 SN74LVT244BDW BUFFER HEX-INVER-SCH 74LVC14AD MITT-TRIGGER 3.3V-OCTAL- IDT74FCT3244APY BUFFER 3.3V 1-10 CLOCK IDT74FCT3807AQ DRIVER USB-TX/RX CYPRESS CY7C64603-128NC MICROCON- TROLLER NPN TRANSIS- FAIRCHILD MMBT4401 TOR 200MA 128K X 8 SRAM CYPRESS CY7C1019BV33-12VC 12.0MHZ DIG01 300-6027-ND CRYSTAL ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 54 ST MICRO DSM2150F5V 0.01uF 100V 10% C46–47, C52–53, 12061C103KAT050M CERM C58–59, C64–65, C74–81, C94–97, C121–128, C136–142, C156–157, C161 1000pF 50V 5% C84–85 12065A102JAT2A CERM 150pF 50V 5% 12065A151JAT2A CERM 2200pF 50V 5% C19, C41 12065A222JAT2A ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 55 ADSP-TS101S EZ-KIT Lite Bill Of Materials Ref. Qty. Description Reference Manufacturer Part Number Designator 0.1uF 50V 20% 12065E104MAT2A CERM VOLTAGE- ANALOG ADM708SAR SUPERVISOR DEVICES 2.5V-1.0AMP ANALOG ADP3338AKC-2.5 REGULATOR DEVICES 5V-1.5A ANALOG ADP3339AKC-5-REEL REGULATOR DEVICES DUAL AUDIO OP U10–12 ANALOG SSM2275S...
  • Page 56 08055C104KAT CERM C42–45, C48–51, C54–57, C60–63, C66–73, C82–83, C86–93, C98–120, C129–135, C143–155, C158–160, 162, C172, C173 0.001uF 50V 5% C4–6, C12, C28, 08055A102JAT2A C30, C32–33, C164 10uF 16V 10% CT9, CT24–25 SPRAGUE 293D106X9025C2T TANT ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 57 ADSP-TS101S EZ-KIT Lite Bill Of Materials Ref. Qty. Description Reference Manufacturer Part Number Designator 10K 100MW 5% R8–10, R13, R15, CR21-103J-T R30, R32, R36, R45–47, R52, R53, R56, R58–59, R61, R63, R64, R67, R73–81, R83, R93, R97, R99, R151, R152 33 100MW 5% R22, R66, R68–71,...
  • Page 58 R104–105, PANASONIC ERJ-8ENF5491V R109–110 3.32K 1/8W 1% R106, R111 PANASONIC ERJ-8ENF3321V 1.65K 1/8W 1% R1, R107, R112 PANASONIC ERJ-8ENF1651V 10UF 16V 20% CT11–12 DIG01 PCE3062TR-ND ELEC 68UF 25V 20% CT13, CT18 PANASONIC EEV-FC1E680P ELEC ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 59 ADSP-TS101S EZ-KIT Lite Bill Of Materials Ref. Qty. Description Reference Manufacturer Part Number Designator 1800UF 10V 20% CT19 RUBYCON 10MBZ1800M 2.2UH X 20% COOPER ELE UP2C-2R2 TEHC 1800UF 6.3V 20% CT20–21 RUBYCON 6.3MBZ1800M 10K 31MW 5% RN2, RN4, RN5, 746X101103J 3.9NF 50V 5%...
  • Page 60 GULL-WING 604 1/8W 1% R100, R127 PANASONIC ERJ-8ENF6040V 1uF 25V 20% CT1–8, CT22–23 PANASONIC ECS-T1EY105R QUICK- U17–18 ANALOG ADG774ABRQ SWITCH-257 DEVICES IDC 7X2 BERG 54102-T08-07 3.5MM P2–3 SHOGYO SJ-0359AM-5 STEREO_JACK 32MB SDRAM VIKING PE464U4-CL2 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 61 ADSP-TS101 EZ-KIT LITE ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD Title Approvals Date ADSP-TS101 EZ-KIT LITE Drawn Size Board No. Checked A0163-2001 Engineering Date Sheet 1-19-2004_15:25...
  • Page 62 3.3V A[0:31] D[0:63] L0DAT[0:7]_A L0DAT0_A FLAG0_A FLAG0 L0DAT0 L0DAT1_A FLAG1_A FLAG1 L0DAT1 AA16 L0DAT2_A FLAG2_A FLAG2 L0DAT2 AB17 L0DAT3_A FLAG3_A FLAG3 L0DAT3 COM1 COM4 AB18 L0DAT4_A L0DAT4 IOEN AA17 L0DAT5_A IRQ0_A IRQ0 L0DAT5 BRST AB19 L0DAT6_A IRQ1_A IRQ1 L0DAT6 DMAR2 AB20 L0DAT7_A IRQ2_A...
  • Page 63 A[0:31] D[0:63] L0DAT[0:7]_B L0DAT0_B FLAG0_B FLAG0 L0DAT0 L0DAT1_B FLAG1_B FLAG1 L0DAT1 AA16 L0DAT2_B FLAG2_B FLAG2 L0DAT2 AB17 L0DAT3_B FLAG3_B FLAG3 L0DAT3 AB18 L0DAT4_B L0DAT4 AA17 L0DAT5_B IRQ0_B IRQ0 L0DAT5 AB19 L0DAT6_B IRQ1_B IRQ1 L0DAT6 AB20 L0DAT7_B IRQ2_B IRQ2 L0DAT7 AA18 IRQ3_B IRQ3 L0CLKIN...
  • Page 64 4M x 64 SDRAM 3.3V A[0:15] D[0:63] 512 KB MAIN FLASH COM1 COM4 32KB SECONDARY FLASH A[21:0] D[7:0] SDA10 COM2 COM3 LDQM DQMB0 DQMB1 AD10 DQMB2 AD11 DQMB3 AD12 HDQM DQMB4 AD13 BGA36 DQMB5 AD14 DQMB6 AD15 3.3V DQMB7 SDWE COM1 SDCKE CKE0...
  • Page 65 3.3V 3.3V 96/48~ OUTL- OUTL- 384/256~ OUTL+ OUTL+ X2MCLK MCLK MCLK OUTR- OUTR- C166 BCLK BCLK OUTR+ OUTR+ 100PF 1206 CAPLN CASC LRCLK LRCLK CAPLP SDATA FILTR 0.01UF XCTRL INL+ VINLP FILTB C165 CCLK/{256~/512} 0.01UF INL- VINLN CCLK COUT/{DF0} CLATCH ZEROL CIN/{DF1} INR+...
  • Page 66 CT11 FER2 R119 R120 10UF 5.76K 5.76K CAP002 1206 1206 1206 120PF 100K 100PF 1206 1206 1206 R121 1206 INL- AGND VREF_AUDIO SSM2275S SOIC8 0.001UF R124 R123 5.76K 5.76K 1206 1206 100PF 1206 ADC LEFT 120PF 1206 AGND 0.001UF R117 750K LOOPBACK_LEFT 1206...
  • Page 67 R105 5.49K 100PF 1206 1206 R101 R106 11.0K 3.32K 1206 1206 OUTR- CT13 330PF R100 68UF CAP003 1206 DAC RIGHT 100PF 1206 SSM2275S 680PF SOIC8 R104 R107 R102 5.49K 1.65K 2200PF 49.9K 1206 1206 1206 1206 OUTR+ R108 2.74K 220PF 1206 1206 AGND...
  • Page 68 3.3V 0.00 1206 3.3V IRQ0_A 74LVC14A SN74AHC1G00 SWT013 SOIC14 SOT23-5 SPST-MOMENTARY 3.3V USB_CONFIGURED 3.3V USB_RESET RESET SN74AHC1G00 SOT23-5 RESET SWT013 SPST-MOMENTARY RESET ADM708SAR 3.3V SOIC8 0.00 1206 IRQ0_B 74LVC14A SN74AHC1G00 SOFT_RESET SWT013 SOIC14 SOT23-5 SPST-MOMENTARY USB RESET RESET DSP_RESET LED2 LED8 LED9 RED-SMT...
  • Page 69 DSP_A ID = 000 ID0_A ID1_A 3.3V ID2_A COM1 COM2 3.3V ID2_B ID1_B RNET8 COM1 COM2 ID0_B DSP_B ID = 001 RNET8 CONTROLIMP0 CONTROLIMP1 CONTROLIMP2 SCLK_P_A 3.3V SCLK_P_B BMS~/EBOOT BM~/IRQEN LCLKRAT0 LCLK_P_A LCLKRAT1 1206 1206 LCLKRAT2 LCLK_P_B SCLKFREQ SWT014 DIP12 SDRAM_CLK0 R130 83.33MHZ...
  • Page 70 CLKSH ACKSH L0DAT[0:7]_A L0DAT0_A D0SH L0DAT1_A D1SH L0DAT2_A D2SH L0DAT3_A D3SH D[0:63] L0DAT4_A D4SH A[0:31] L0DAT5_A D5SH L0DAT6_A D6SH 3.3V L0DAT7_A D7SH RXCLKSH RXCLK L0CLKIN_A TXCLKSH TXCLK L0CLKOUT_A LINKPORT CON010 SDRAM_CLK2 SDWE DMAR1 DMAR0 SDA10 DMAR3 DMAR2 HDQM CLKSH SDCKE LDQM ACKSH L1DAT[0:7]_A...
  • Page 71 CT19 1800UF CAP015 PGND 10UF CT26 22UF CAP+ FER4 CHOKE_COIL CT10 CAP- FUS003 DO-214AA 4.7UF 0.1UF ADM660 PGND VDDINT FDS6982 SOIC8 SOIC8 1000PF 2.2UH .008 1206 IND002 2512 DO-214AA R144 PGND 0.00 7_5V_POWER CON005 VID3 R145 CT20 CT21 VID2 DRVH 0.00 1800UF 1800UF...
  • Page 72 VDDINT VDDINT C107 C156 0.1UF 0.1UF 0.1UF 0.1UF 0.1UF 0.01UF 0.01UF 0.1UF 0.1UF 0.1UF 0.1UF 0.01UF 0.01UF 0.01UF 1206 1206 1206 1206 1206 3.3V C114 C115 C113 C116 C119 C118 C120 C117 C121 C122 C123 C124 C125 C126 C127 C128 0.1UF 0.1UF 0.1UF...
  • Page 73 (SW7), CLKIN pins, example programs, 1-12 CLKOUT pins, expansion interface, 2-3, 2-14 clock external frequency, See also SDRAM mode settings (SW7), interrupts, 1-10 codecs, See AD1871, AD1854 memory, -xi, 1-11 ports, ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 74 See flags by name (FLAGx) push buttons JTAG See also push buttons by name (SWx) connector (P5), 2-4, 2-13 diagram of locations, emulation port, programming cable, 1-11 registration, of this product, ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 75 VisualDSP++ SW2 (FLAG1_B/interrupt) push button, 1-10, documentation, -xix 2-7, 2-11 environment, SW3 (IRQ0_A) push button, 1-10, 2-11 online Help, -xix SW4 (FLAG0_A) push button, 1-10, 2-11 voltage regulators, SW5 (FLAG0_B) push button, 1-10, 2-11 ADSP-TS101S EZ-KIT Lite Evaluation System Manual...
  • Page 76 INDEX ADSP-TS101S EZ-KIT Lite Evaluation System Manual...

Table of Contents