Analog Devices ADSP-TS201S EZ-KIT Lite Manual
  1. Manuals
  2. Brands
  3. Analog Devices Manuals
  4. Motherboard
  5. ADSP-TS201S EZ-KIT Lite
  6. Manual
Analog Devices ADSP-TS201S EZ-KIT Lite Manual

Analog Devices ADSP-TS201S EZ-KIT Lite Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
ADSP-TS201S EZ-KIT Lite
Evaluation System Manual
Revision 3.1, April 2007
Part Number
82-000770-01
Analog Devices, Inc.
a
One Technology Way
Norwood, Mass. 02062-9106

Advertisement

Table of Contents
loading

Related Manuals for Analog Devices ADSP-TS201S EZ-KIT Lite

Summary of Contents for Analog Devices ADSP-TS201S EZ-KIT Lite

  • Page 1 ® ADSP-TS201S EZ-KIT Lite Evaluation System Manual Revision 3.1, April 2007 Part Number 82-000770-01 Analog Devices, Inc. One Technology Way Norwood, Mass. 02062-9106...
  • Page 2 Analog Devices or from an authorized dealer. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use;...
  • Page 3 Regulatory Compliance The ADSP-TS201S EZ-KIT Lite evaluation system has been certified to comply with the essential requirements of the European EMC directive 89/336/EEC (inclusive 93/68/EEC) and, therefore, carries the “CE” mark. The ADSP-TS201S EZ-KIT Lite evaluation system had been appended to Analog Devices Development Tools Technical Construction File refer- enced “DSPTOOLS1”...

  • Page 5: Table Of Contents

    Accessing Documentation From VisualDSP++ ....xviii Accessing Documentation From Windows ......xviii Accessing Documentation From Web ........xix Printed Manuals ............... xix VisualDSP++ Documentation Set ......... xix Hardware Tools Manuals ............xix Processor Manuals ..............xx ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 6 Flash Programmer Utility ............1-14 ADSP-TS201S EZ-KIT LITE HARDWARE REFERENCE System Architecture ..............2-2 External Port ................2-3 Expansion Interface ..............2-3 JTAG Emulation Port ............. 2-4 Switch Settings ................2-5 Audio Amplification Selection (SW1) ........2-5 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 7 Interrupt Push Buttons (SW4 and SW5) ........ 2-19 Reset Push Button (SW3) ............2-19 Connectors ................. 2-20 Audio (J9 and J10) ..............2-21 Power (J8) ................2-21 JTAG (ZP4) ................2-21 USB (ZJ1) ................2-22 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 8 Audio In ..................B-8 Audio Out ..................B-9 Reset/PB/LED ................B-10 Expansion Interface ..............B-11 JTAG/CPLD For Audio .............. B-12 Power Page 1 ................B-13 Power Page 2 ................B-14 Processor Bypass Caps ..............B-15 INDEX viii ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 9: Preface

    PREFACE ® Thank you for purchasing the ADSP-TS201S EZ-KIT Lite , Analog ® Devices (ADI) evaluation system for TigerSHARC floating-point embedded processors. The TigerSHARC processor is a static super scalar (SSS) architecture tar- geted at software-defined radio applications. In these wireless...
  • Page 10 The ADSP-TS201S EZ-KIT Lite provides example programs to demon- strate the capabilities of the evaluation board. The ADSP-TS201S EZ-KIT Lite installation is part of the Visu- alDSP++ installation. The EZ-KIT Lite is a licensed product that offers an unrestricted evaluation license for the first 90 days. For details about evaluation license restrictions after the 90 days, refer “Evaluation License Restrictions”...
  • Page 11 4 push button flags (two for each processor) 2 push button interrupts (one for each processor) 4 LED FLAG outputs (two for each processor) • Analog Devices ADP3331, ADP3336, ADP1864, ADP1821, and ADP1823 voltage regulators The EZ-KIT Lite board contains two external memories: flash memory and SDRAM.

  • Page 12: Purpose Of This Manual

    Intended Audience The primary audience of this manual is a programmer who is familiar with Analog Devices processors. This manual assumes that the audience has a working knowledge of the appropriate processor architecture and instruc- tion set. Programmers who are unfamiliar with Analog Devices processors...

  • Page 13: Manual Contents

    CD. Alternatively, the schematic can be found on the Analog Devices Web site: www.analog.com/processors What’s New in This Manual This edition of the ADSP-TS201S EZ-KIT Lite Evaluation System Manual documents ADSP-TS201S EZ-KIT Lite compliance with the RoHS and WEEE directives. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 14: Technical Or Customer Support

    Technical or Customer Support Technical or Customer Support You can reach Analog Devices, Inc. Customer Support in the following ways: • Visit the Embedded Processing and DSP products Web site at http://www.analog.com/processors/technicalSupport • E-mail tools questions to processor.tools.support@analog.com • E-mail processor questions to processor.support@analog.com (World wide support)

  • Page 15: Product Information

    MyAnalog.com MyAnalog.com is a free feature of the Analog Devices Web site that allows customization of a Web page to display only the latest information on products you are interested in. You can also choose to receive weekly e-mail notifications containing updates to the Web pages that meet your interests.

  • Page 16: Related Documents

    Product Information You may also obtain additional information about Analog Devices and its products in any of the following ways. • E-mail questions or requests for information to processor.support@analog.com (World wide support) processor.europe@analog.com (Europe support) processor.china@analog.com (China support) • Fax questions or requests for information to...

  • Page 17: Online Technical Documentation

    VisualDSP++ CD at any time by run- ning the Tools installation. Access the online documentation from the ® VisualDSP++ environment, Windows Explorer, or the Analog Devices Web site. ADSP-TS201S EZ-KIT Lite Evaluation System Manual xvii...

  • Page 18: Accessing Documentation From Visualdsp

    To view VisualDSP++ Help, click on the Help menu item or go to the Windows task bar and navigate to the VisualDSP++ documentation via the Start menu. To view ADSP-TS201S EZ-KIT Lite Help, which is part of the Visu- alDSP++ Help system, use the Contents or Search tab of the Help window.

  • Page 19: Accessing Documentation From Web

    To purchase VisualDSP++ manuals, call 1-603-883-2430. The manuals may be purchased only as a kit. If you do not have an account with Analog Devices, you are referred to Analog Devices distributors. For information on our distributors, log onto http://www.analog.com/salesdir/continent.asp...

  • Page 20: Processor Manuals

    1-800-ANALOGD (1-800-262-5643); they also can be downloaded from the Web site. To have a data sheet faxed to you, call the Analog Devices Faxback System at 1-800-446-6212. Follow the prompts and a list of data sheet code numbers will be faxed to you. If the data sheet you want is not listed, check for it on the Web site.

  • Page 21: Notation Conventions

    A Warning identifies conditions or inappropriate usage of the product that could lead to conditions that are potentially hazardous for the devices users. In the online version of this book, the word Warning appears instead of this symbol. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 22 Notation Conventions Additional conventions, which apply only to specific chapters, may appear throughout this document. xxii ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 23: Using Adsp-Ts201S Ez-Kit Lite

    1 USING ADSP-TS201S EZ-KIT LITE This chapter provides specific information to assist you with development of programs for the ADSP-TS201S EZ-KIT Lite evaluation system. The information appears in the following sections. • “Package Contents” on page 1-2 Lists the items contained in your ADSP-TS201S EZ-KIT Lite package.

  • Page 24: Package Contents

    For detailed information about programming the ADSP-TS201S Tiger- SHARC processor, see the documents referred to as “Related Documents”. Package Contents Your ADSP-TS201S EZ-KIT Lite package contains the following items. • ADSP-TS201S EZ-KIT Lite board • VisualDSP++ Installation Quick Reference Card ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 25: Default Configuration

    Store unused EZ-KIT Lite boards in the protective shipping package. The ADSP-TS201S EZ-KIT Lite board is designed to run outside your personal computer as a stand-alone unit. You do not have to open your computer case.
  • Page 26 Figure 1-1 shows the default DIP switches, connector locations, and LEDs used in installation. Confirm that your board is set up in the default configuration before using the board. Figure 1-1. EZ-KIT Lite Hardware Setup ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 27: Installation And Session Startup

    New Session from the Session List dialog box. 4. The Select Processor page of the wizard appears on the screen. Ensure TigerSHARC is selected in Processor family. In Choose a target processor, select ADSP-TS201. Click Next. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 28 To disconnect from a session, click the disconnect button or select Session –> Disconnect from Target. To delete a session, select Session –> Session List. Select the ses- sion name from the list and click Delete. Click OK. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 29: Evaluation License Restrictions

    The configuration of internal memory is detailed in the ADSP-TS201 TigerSHARC Processor Hardware Reference. The ADSP-TS201S EZ-KIT Lite board contains 512K x 8-bit of external flash memory. The memory is divided into eight uniform 64 Kb sections. This memory connects to the processor’s pins.

  • Page 30: Sdram Interface

    SDRAM Interface The SDRAM on the EZ-KIT Lite evaluation board is 32 MB. To access SDRAM, the registers must be configured properly. SYSCON SDRCON The SDRAM default values are: • SYSCON 0x00189067 • SDRCON 0x00005983 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 31: Flash Memory

    Table 1-2. Flash Memory Map Start Address End Address Content Uniform block 0 0x3000 0000 0x3000 FFFF Uniform block 1 0x3001 0000 0x3001 FFFF Uniform block 2 0x3002 0000 0x3002 FFFF Uniform block 3 0x3003 0000 0x3003 FFFF ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 32: Programmable Flag Pins

    Programmable flags SQSTAT are summarized in Table 1-3. For more information on how to configure the programmable flag pins, see the ADSP-TS201S TigerSHARC Processor Hardware Reference. 1-10 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 33: Interrupt Pins

    Description interrupt connects to push buttons to supply feed- IRQ0_A IRQ0 back for program execution. For instance, you can write your IRQ0_B code to perform a different function when an interrupt is detected. ADSP-TS201S EZ-KIT Lite Evaluation System Manual 1-11...

  • Page 34: Audio Interface

    CPLD. Refer to the audio example program included in the EZ-KIT Lite’s installation directory for more information on how to use the audio interface. Refer to “Audio (J9 and J10)” on page 2-21 for information about the audio connectors. 1-12 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 35: Processor Link Ports

    Example Programs Example programs are provided with the ADSP-TS201S EZ-KIT Lite to demonstrate various capabilities of the evaluation board. These programs are installed with the EZ-KIT Lite software and can be found in the subdirectory of the Visu- …\TS\Examples\ADSP-TS201 EZ-KIT Lite...

  • Page 36: Flash Programmer Utility

    Flash Programmer Utility Flash Programmer Utility The ADSP-TS201S EZ-KIT Lite evaluation system includes a Flash Pro- grammer utility. The utility allows you to program the flash memory on the EZ-KIT Lite. The Flash Programmer is installed with VisualDSP++. Once the utility is installed, it is accessible from the Tools pull-down menu.

  • Page 37: Adsp-Ts201S Ez-Kit Lite Hardware Reference

    Shows the location of and gives the part number for all of the con- nectors on the board. In addition, provides the manufacturer and part number information for the mating parts. • “Power Supply Specifications” on page 2-23 Describes the power connector. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 38: System Architecture

    Figure 2-1. System Architecture This EZ-KIT Lite has been designed to demonstrate the capabilities of the ADSP-TS201S TigerSHARC processor. The processor is powered by three separate regulators for the core, internal DRAM, and IO. The pro- ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 39: External Port

    The expansion interface consists of three connectors. The following table shows the interfaces each connector provides. For the exact pinout of the connectors, refer to “Expansion Interface” on page B-11. Table 2-1. Expansion Interface Connectors Connector Interfaces , address, data ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 40: Jtag Emulation Port

    The maximum current limit depends on the regulator capabilities. Additional circuitry can also add extra loading to signals, decreasing their maximum effective speed. Analog Devices does not support and is not responsible for the effects of additional circuitry. JTAG Emulation Port The JTAG emulation port allows an emulator to access the processor’s...

  • Page 41: Switch Settings

    Table 2-2. An amplification gain of a factor of 10 can be achieved by set- ting the switch into electret microphone use. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 42: Processor Mode Selections (Sw2)

    Do not change the switch settings while power is being applied to the board. Many of the strap pin settings can be re-configured in software after the processor is powered up. Refer to the ADSP-TS201S processor data sheet at http://www.analog.com/Uploaded- for more information. Files/Data_Sheets/ADSP_TS201S.pdf ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 43: Processor Boot Strap Settings

    SYSCON/SDRCON always writable In emulation space, the registers can be written SYSCON SDRCON to as many times as needed. The USB debug monitor operates in emulation space and allows “always writable” mode for these registers. ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 44: Interrupt Enable Settings

    Table 2-7. Link Port Width Settings (SW2 Position 4) SW2 Position 4 Link Port Data Width for Processor A (U11) 1-bit link port data width (default) 4-bit link port data width ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 45: Flags And Irqs Switch Settings (Sw10)

    DSP B DSP A DSP B Use With Position 1 Position 2 Position 3 Position 4 Position 5 Position 6 (FLAG0) (FLAG1) (FLAG0) (FLAG1) (IRQ0) (IRQ0) External source On-board push button switch 1 Default settings ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 46: Configuration Resistors

    The two ADSP-TS201S processors on the EZ-KIT Lite are factory-config- ured to set the processor A to an ID value of zero and processor B to an ID value of one. This means that in the cluster, processor A is the master. 2-10 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 47 Table 2-11. Processor B ID Pins Configuration R122 (Net: ID2_B) R123 (Net: ID1_B) R124 (Net: ID0_B) ID[2:0] Value Not populated Not populated Not populated Not populated Populated Not populated Not populated Populated Not populated ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-11...

  • Page 48: Clock Mode Settings

    The final frequency at which the processors operate is determined by the following equation: (Freq of U18)*(Mult Factor of U1)*(Mult Factor of SCLKRAT pins) = Final Oper Freq The default frequency factory setting is 20 MHz*5*5 = 500 MHz 2-12 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 49 R133 (SCLKRAT0) Multiplication Factor Not populated Not populated Not populated Not populated Populated Not populated Not populated Populated Not populated Not populated Populated Populated Populated Not populated Not populated Populated Not populated Populated ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-13...

  • Page 50: Control Impedance Selection

    Table 2-15. The resistors are used together with the drive strength pins to determine the actual impedance and drive strength. Refer to the ADSP-TS201S processor data sheet at http://www.analog.com/UploadedFiles/Data_Sheets/ADSP_TS201S.pdf for more information. 2-14 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 51: Drive Strength Selection

    Not populated Populated 61.9% 62 Ohm Not populated Not populated 74.6% 70 Ohm Not populated Not populated Populated Populated 87.3% 96 Ohm Not populated Populated Not populated 100% 120 Ohm 1 Default settings ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-15...

  • Page 52: Leds And Push Buttons

    The green LED, , indicates that power is being supplied properly to LED1 the board. Reset LED (LED8) When is lit, it indicates that the master reset of all the major ICs is LED8 active. 2-16 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 53: Flag Leds (Led3-6)

    ” from FLAG3 the processor. Refer to “Programmable FLAG Pins” on page 1-10 information on how to utilize the flags when programming the processor. Table 2-18 shows the signals and corresponding LEDs. FLAG ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-17...

  • Page 54: Usb Monitor Led (Zled3)

    Table 2-19 shows the signals FLAG and corresponding switches. Table 2-19. FLAG Push Buttons FLAG Pin Push Button Reference Designator FLAG0_A FLAG1_A FLAG0_B FLAG1_B 2-18 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 55: Interrupt Push Buttons (Sw4 And Sw5)

    Table 2-20. Interrupt Push Buttons Interrupt Pin Push Button Reference Designator IRQ0_A IRQ0_B Reset Push Button (SW3) push button, , resets all ICs on the board, except the USB RESET interface after it has been configured. ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-19...

  • Page 56: Connectors

    Connectors Connectors This section describes the connector functionality and provides informa- tion about mating connectors. The connector locations are shown in Figure 2-5. Figure 2-5. Connector Locations 2-20 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 57: Audio (J9 And J10)

    The JTAG header is the connecting point for a JTAG in-circuit emulator pod. For more information about a JTAG custom board design or inter- face, please refer to EE-68 found at Analog Devices Web site. Pin 3 is missing to provide keying. Pin 3 in the mating connector should have a plug.

  • Page 58: Usb (Zj1)

    Part Number 90-position 0.05” spacing SAMTEC SFC-145-T2-F-D-A Mating Connectors 90-position 0.05” spacing SAMTEC TFM-145-x1 series (through hole) 90-position 0.05” spacing SAMTEC TFM-145-x2 series (surface mount) 90-position 0.05” spacing SAMTEC TFC-145 series (low cost) 2-22 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 59: Link Ports (J4-7)

    Power Supply Specifications The power connector supplies DC power to the EZ-KIT Lite board. Table 2-21 shows the power connector pinout. Table 2-21. Power Connector Terminal Connection Center pin +7.5 VDC@4 amps Outer ring ADSP-TS201S EZ-KIT Lite Evaluation System Manual 2-23...
  • Page 60 Power Supply Specifications 2-24 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 61 SOT23-5 12.288MHZ DIGI-KEY SG-8002CA-PCC-ND OSC003 (12.288M) MMBT3904 SOT23 MOUSER 512-MMBT3904 MT48LC4M32B2 U24-25 DIGI-KEY 557-1196-1-ND TSOP86 IDT5V928PGI IDT5V928PGGI TSSOP24 TS201S ATMEL AT49BV040B-70JU AT49BV040 "U10" LMV722M SOIC8 U6-8,U26 NATIONAL LMV722MNOPB SEMI TS201S XC2C384 XILINX XC2C384-10TQG144C “U4” ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 62 ADP3336ARMZ-REEL MSOP8 DEVICES ADSP-TS201SA U11-12 ANALOG AD91032Z BP576 DEVICES ADP1864 SOT23-6 ANALOG ADP1864AUJZ-R7 DEVICES ADP1823 LFCSP32 ANALOG ADP1823ACPZ-R7 DEVICES ADP1821 QSOP16 ANALOG ADP1821ARQZ-R7 DEVICES RUBBER FOOT M1-5 MOUSER 517-SJ-5018BK SWITCH- RAPC712X 2.5MM_JACK CRAFT CON005 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 63: Adsp-Ts201 Ez-Kit Lite Bill Of Materials

    R107,R109-110, R113,R118, R161-164, R178-179,R202 YELLOW LED001 LED3-6 PANASONIC LN1461C 22PF 50V 5% 0805 08055A220JAT 330PF 50V 5% C25,C30 08055A331JAT 0805 0.01UF 100V 10% C1-2,C7-8 08051C103KAT2A 0805 0.1UF 50V 10% C4,C142-143, 08055C104KAT 0805 C145-149, C153,C249 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 64 100 1/10W 5% R78,R85,R95, VISHAY CRCW0805100RJNEA 0805 R99,R101,R103 220PF 50V 10% C28,C32 12061A221JAT2A 1206 600 100MHZ FER1-3,FER6-7 STEWARD HZ1206B601R-10 500MA 1206 237.0 1/8W 1% R46,R48,R50, VISHAY CRCW1206237RFKEA 1206 750.0K 1/8W 1% R47,R49 VISHAY CRCW1206750KFKEA 1206 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 65 3.32K 1/8W 1% R66,R71 VISHAY CRCW12063K32FKEA 1206 1.65K 1/8W 1% R67,R72 VISHAY CRCW12061K65FKEA 1206 10UF 16V 20% CT4-5 PANASONIC EEE1CA100SR CAP002 68UF 25V 20% CT6-7 PANASONIC EEE-FC1E680P CAP003 332.0K 1/10W 1% R234 VISHAY CRCW0805332KFKEA 0805 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 66 10UF 6.3V 10% C33,C57-58, 080560106KAT2A 0805 C90-92,C99 1000PF 10V 20% C38-40,C42-43, DIGI-KEY 311-1136-1-ND 0805 4.7UF 6.3V 10% C70,C74 08056D475KAT2A 0805 0.1UF 10V 10% C66,C69,C75, 0402ZD104KAT2A 0402 C108,C111- 115,C118,C120, C141,C144, C165-166, C182,C184- 185,C187, C197-201, C221-225, C228-231, C237-239,C241 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 67 R124,R133, R140-146, R154 100UF 10V 10% C CT20-21 TPSC107K010R0075 1000PF 50V 5% C67,C168-180, 04025C102JAT2A 0402 C186,C188- 196,C206-215, C217,C226, C233-236, C243-246 64.9K 1/10W 1% R191 VISHAY CRCW080564K9FKEA 0805 57.6K 1/4W 1% R147-148 VISHAY CRCW120657K6FKEA 1206 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 68 2200PF 50V 5% PANASONIC ECJ-1VB1H222K 0603 470UF 2V 20% E CT16,CT19, PANASONIC EEF-SE0D471R CT22-23 15.0K 1/16W 1% R193,R195 DIGI-KEY 311-15.0KHRTR-ND 0603 24.9K 1/10W 1% DIGI-KEY 311-24.9KHTR-ND 0603 47UF 6.3V 10% B CT14 NIC COMPO- NTC-T476K6.3TRBF NENTS ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 69 R74-75 PANASONIC ERJ-8ENF6040V 1206 1UF 20V 20% A CT8-13 TAJA105K020R 255.0K 1/10W 1% R168 VISHAY CRCW06032553FK 0603 80.6K 1/10W 1% R167 DIGI-KEY 311-80.6KHRCT-ND 0603 6.8UH 25% DIGI-KEY 308-1328-1-ND IND009 4A SSB43L VISHAY SSB43L DO-214AA ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 70 430 1/16W 1% R194 DIGIKEY 311-430LRCT-ND 0402 2.2PF 50V 10% C100 DIGIKEY 490-1267-1-ND 0402 1200PF 50V 10% DIGIKEY 490-1304-1-ND 0402 330UF 10V 20% D CT17-18 SANYO 10TPB330M 82PF 50V 5% 0402 DIGIKEY 490-1290-1-ND A-10 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 71 0402 1UH 20% IND011 DIGIKEY 495-1985-1-ND 5A MBRS540T3G D1-2 ON SEMI MBRS540T3G 8.20K 1/10W 1% R210 DIGIKEY 541-8.20KHCT-ND 0603 10.0K 1/16W 1% R185 DIGIKEY P10.0KLCT-ND 0402 1.50K 1/16W 1% R204 DIGIKEY P1.50KLCT-ND 0402 ADSP-TS201S EZ-KIT Lite Evaluation System Manual A-11...
  • Page 72 A-12 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...

  • Page 73: Adsp-Ts201S Ez-Kit Lite Schematic

    ADSP-TS201S EZ-KIT Lite ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title TITLE Size Board No. A0178-2002 2.1C Date 4-9-2007_15:02 Sheet...
  • Page 74 DATA57 IDT5V928PGI 20MHz DATA58 DSP_RESET RST_IN DATA59 DATA60 RST_OUT DATA61 DATA62 ANALOG 20 Cotton Road 0805 POR_IN DATA63 Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201SA BP576 ADSP-TS201S EZ-KIT LITE Title DSP A Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...
  • Page 75 0805 DATA56 DATA57 DATA58 DSP_RESET RST_IN DATA59 DATA60 RST_OUT DATA61 ANALOG 20 Cotton Road DATA62 0805 Nashua, NH 03063 POR_IN DATA63 DEVICES PH: 1-800-ANALOGD ADSP-TS201SA BP576 ADSP-TS201S EZ-KIT LITE Title DSP B Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...
  • Page 76 R236 R237 R238 DEVICES R108 R116 R119 R153 PH: 1-800-ANALOGD 0805 0805 0805 0805 0805 0805 0805 0805 ADSP-TS201S EZ-KIT LITE Title L0BCMPI_B L0BCMPI_A DSP LINK PORTS L1BCMPO_A L1BCMPI_A L2BCMPO_A Size Board No. L2BCMPI_A A0178-2002 L3BCMPI_B 2.1C L3BCMPI_A Date 1-10-2007_10:57...
  • Page 77 1000PF 0805 0805 0805 ANALOG 20 Cotton Road PLACE CLOSE TO DSP B PINS Nashua, NH 03063 PLACE CLOSE TO DSP A PINS DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title DSP POWER Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...

  • Page 78: Configuration

    61.9% 74.6% DEFAULT 87.3% R135 R136 R137 R138 100% 499.0 499.0 499.0 499.0 ANALOG 20 Cotton Road 0805 0805 0805 0805 Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title CONFIGURATION Size Board No. A0178-2002 2.1C Date 4-9-2007_14:58 Sheet...

  • Page 79: Memory

    C133 C134 C140 C139 C137 C138 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF 0.01UF ADSP-TS201S EZ-KIT LITE Title 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 MEMORY Size Board No. A0178-2002 2.1C...

  • Page 80: Audio In

    PH: 1-800-ANALOGD 5.76K AGND AGND AGND AGND AUDIO_IN_LEFT 1206 NEAR U6 NEAR U7 NEAR U26 AD1871 AD1871 AD1871 INR-_AMPIN INR-_AMPOUT ADSP-TS201S EZ-KIT LITE Title INL-_AMPOUT AUDIO IN R152 DIP4 5.76K SWT018 1206 Size Board No. INL-_AMPIN A0178-2002 2.1C Date 1-10-2007_10:57...

  • Page 81: Audio Out

    C142 C143 C153 0.1UF 0.1UF 0.1UF 0805 0805 0805 AGND AGND AGND AD1854 AD1854 NEAR U8 ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title AUDIO OUT Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...

  • Page 82: Reset/Pb/Led

    Nashua, NH 03063 Switch OFF = DSP net can come from an external source 0402 0402 0402 0402 0402 DEVICES PH: 1-800-ANALOGD DEFAULT = All Switches ON ADSP-TS201S EZ-KIT LITE Title RESET/PB/LED SN74AHC1G00 74LVC14 74LVC14 IDT74FCT3244APY ADM708 Size Board No. A0178-2002 2.1C...

  • Page 83: Expansion Interface

    L3CLKIN_N_B LABEL "DSP B RX" L3DATI0_P_B CON019 DSP B RX CON019 CON019 L3ACKO_B L3DATI0_N_B L3BCMPI_B CON_RJ45 ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title EXPANSION INTERFACE Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...

  • Page 84: Jtag/Cpld For Audio

    ANALOG 20 Cotton Road BK3_FB23_MC5 BK4_FB17_MC14 Nashua, NH 03063 BK3_FB23_MC12 BK4_FB17_MC16 DEVICES PH: 1-800-ANALOGD CPLD_TCK BK3_FB23_MC13 BK4_FB18_MC3 CPLD_TDO BK3_FB23_MC14 BK4_FB18_MC4 ADSP-TS201S EZ-KIT LITE Title CPLD_TDI BK3_FB24_MC2 BK4_FB18_MC5 FLAG3_A CPLD_TMS BK3_FB24_MC12 BK4_FB18_MC12 DMAR0 JTAG/CPLD FOR AUDIO IDC6X1 BK3_FB24_MC14 BK4_FB18_MC13 Size Board No.

  • Page 85: Power Page 1

    210.0K 4.7UF MSC009 MSC009 MSC009 MSC009 MSC009 0805 0805 0805 0805 0805 R191 64.9K 0805 AGND ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title POWER PAGE1 Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...

  • Page 86: Power Page 2

    0805 SYNC DGND2 ADP1823 LFCSP32 FDS9926A SOIC8 DGND2 DGND2 AGND2 DGND2 COPPER AGND2 ANALOG 20 Cotton Road AGND2 Nashua, NH 03063 COPPER DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title POWER PAGE2 DGND2 Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...
  • Page 87 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 ANALOG 20 Cotton Road Nashua, NH 03063 DEVICES PH: 1-800-ANALOGD ADSP-TS201S EZ-KIT LITE Title DSP BYPASS CAPS Size Board No. A0178-2002 2.1C Date 1-10-2007_10:57 Sheet...
  • Page 88 See AD1871, AD1854 SW1 (audio amplification) switch, complex programmable logic device (CPLD), SW2, 2-5, 2-7, 1-12 driver mode resistors (CONTROLIMP1-0), configuration, of this EZ-KIT Lite, 2-14 configuration resistors, 2-10 drive strength selection (R132, R135-136), 2-15 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 89 ZLED3 (USB monitor), 1-5, 2-18 boot memory select pins, license restrictions, map of, link ports frequency, 1-13, 2-12 connections, 1-12 width settings (SW2), LVDS signaling, 1-12 general-purpose IO pins, -xi, 2-18 GND pins, 2-23 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 90 SW8 (FLAG1_A) push button, 1-11, 2-18 SW9 (FLAG0_A) push button, 1-11, 2-18 registration, of this product, SYSCON registers, 1-8, reset system architecture, of this EZ-KIT Lite, master (LED8), 2-16 processor, push button (SW3), 2-19 TX port, 1-12 ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 91 INDEX VisualDSP++ cable, documentation, connector (ZJ1), 2-22 environment, interface, 1-9, 2-7, 2-21 online Help, xviii monitor LED (ZLED3), 2-18 voltage regulators, xi, ADSP-TS201S EZ-KIT Lite Evaluation System Manual...
  • Page 92 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc. ADZS-TS201S-EZLITE...

Table of Contents