Interrupt Pins - Analog Devices ADSP-TS201S EZ-KIT Lite Manual

Table of Contents

Advertisement

Table 1-3. Programmable FLAG Pin Summary
FLAG
FLAG0_A
FLAG1_A
FLAG0_B
FLAG1_B
FLAG2_A
FLAG3_A
FLAG2_B
FLAG3_B

Interrupt Pins

The ADSP-TS201S processor includes four interrupt pins (
interaction with the running program. One external interrupt from each
processor is directly accessible through push buttons
EZ-KIT Lite board. Interrupts are summarized in
information on configuring the interrupt pins, see the ADSP-TS201S Tig-
erSHARC Processor Hardware Reference.
Table 1-4. Interrupt Pin Summary
Interrupt
Connection
IRQ0_A
SW4
IRQ0_B
SW5
ADSP-TS201S EZ-KIT Lite Evaluation System Manual
Connection
Description
The
SW9
to supply feedback for program execution. For instance,
you can write user input to trigger a routine when the
SW8
push button is pressed.
SW6
SW7
The
LED4
ply feedback during program execution.
LED6
LED5
LED3
Description
The
IRQ0
back for program execution. For instance, you can write your
code to perform a different function when an interrupt is
detected.
Using ADSP-TS201S EZ-KIT Lite
and
pins connect to the push buttons
FLAG0
FLAG1
and
pins connect to the LEDs to sup-
FLAG2
FLAG3
Table
interrupt connects to push buttons to supply feed-
) for
IRQ3–0
and
on the
SW4
SW5
1-4. For more
1-11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADSP-TS201S EZ-KIT Lite and is the answer not in the manual?

Table of Contents