Using Adsp-Ts201S Ez-Kit Lite - Analog Devices ADSP-TS201S EZ-KIT Lite Manual

1 USING ADSP-TS201S EZ-KIT
LITE
This chapter provides specific information to assist you with development
of programs for the ADSP-TS201S EZ-KIT Lite evaluation system.
The information appears in the following sections.
• "Package Contents" on page 1-2
Lists the items contained in your ADSP-TS201S EZ-KIT Lite
package.
• "Default Configuration" on page 1-3
Shows the default configuration of the ADSP-TS201S EZ-KIT
Lite.
• "Installation and Session Startup" on page 1-5
Instructs how to start a new or open an existing
ADSP-TS201SEZ-KIT Lite session using VisualDSP++.
• "Evaluation License Restrictions" on page 1-7
Describes the restrictions of the VisualDSP++ demo license
shipped with the EZ-KIT Lite.
• "Memory Map" on page 1-7
Describes the ADSP-TS201S EZ-KIT Lite board's memory map.
• "SDRAM Interface" on page 1-8
Defines the register values needed to configure the external mem-
ory for SDRAM access.
• "Flash Memory" on page 1-9
Describes how to program and use the flash memory.
ADSP-TS201S EZ-KIT Lite Evaluation System Manual 1-1