LBC-4000 L-Band Up/Down Converter System
Installation
Feature
1
2
3
4
5
6
Mount the LBC‐4000 in its assigned position in the rack enclosure. Use, as required:
•
A standard rack‐mounted shelf;
•
User‐supplied screws to secure the front panel to the rack enclosure threaded front
mounting rails;
•
Comtech EF Data's optional 4" (KT/6228‐2) or 10" (KT/6228‐3) Rear‐Mounting Support
Brackets Kit (Figure 2‐3).
•
Comtech EF Data's optional 22" (FP/SL0007), 24" (FP/SL0008) or 26" (FP/SL0006) Side‐
Mounting Bearingless Rack Slide Set (Figure 2‐4).
Description
Custom Rack Enclosure
LBC‐4000 Up/Down Converter
Standard Rack Shelving
Rack Enclosure Threaded Front
Mounting Rail (typical)
Unit Front Panel
User‐supplied Screws
Figure 2-2. Installing into a Rack Enclosure
2–3
Revision 4
MN-LBC4000A