Comtech EF Data LBC-4000 Installation And Operation Manual page 52

LBC-4000 L-Band Up/Down Converter System
Updating Firmware
o Click [Open] to turn over file extraction to the user‐supplied utility program. Be
o Click [Save] to open the 'Save As' window. Be sure to select and [Save] the
2. Next, extract the firmware files from the archive file.
•
(If not already done with File Download > [Open]) Extract the firmware files from the
downloaded *.exe or *.zip archive file with the user‐supplied utility program:
o Double‐click on the archive file name, and then follow the prompts provided by the
user‐supplied utility program. Extract, at a minimum, four files:
3. Confirm availability of the firmware files in the temporary folder.
There are several ways the user may view the contents of the temporary folder on a
Windows‐based PC:
A. From the Windows Desktop:
•
Double‐left‐click the 'temp' folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double‐left‐click the 'temp' folder.
•
Use the 'Browse' window ([Start] > ...Run > [Browse]) to locate, and then double‐
click the 'c:\temp' folder.
sure to extract the firmware files to the 'temp' folder created earlier.
archive *.exe or *.zip file to the 'temp' folder created earlier.
Otherwise, click [Cancel] to quit and exit the file download process.
ReleaseNotes_FW9965x_VX.X.X.pdf – Where "x" denotes the firmware
revision letter and "X.X.X" denotes the firmware version number.
FW9965x.CCC – Firmware file, where "x" denotes the firmware revision letter.
FLSHCSAT.EXE – The CEFD Flash Upload Utility Program.
CCCflash.hlp: FLSHCSAT Help File.
4–6
Revision 4
MN/LBC4000.IOM