European Union Low Voltage Directive (Lvd) (2006/95/Ec); European Union Rohs Directive (2002/95/Ec); European Union Telecommunications Terminal Equipment Directive (91/263/Eec) - Comtech EF Data LBC-4000 Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Preface
TO ENSURE THAT THE UNIT COMPLIES WITH THESE STANDARDS, OBEY THESE
INSTRUCTIONS:
•
Use coaxial cable that is of good quality for connections to the L‐Band Type 'N' Rx
(receive) female connector.
•
Use Type 'D' connectors that have back‐shells with continuous metallic shielding.
Type 'D' cabling must have a continuous outer shield (either foil or braid, or both). The
shield must be bonded to the back‐shell.
•
Operate the unit with its cover on at all times.

European Union Low Voltage Directive (LVD) (2006/95/EC)

Symbol Description
<HAR> Type of power cord required for use in the European Community.
CAUTION:
!
ACHTUNG:
Symbol
For additional symbols, refer to Warnings, Cautions and Notes listed earlier in this
Preface.

European Union RoHS Directive (2002/95/EC)

This unit satisfies (with exemptions) the requirements specified in the European Union Directive
on the Restriction of Hazardous Substances in Electrical and Electronic Equipment (EU RoHS,
Directive 2002/95/EC).
European Union Telecommunications Terminal Equipment Directive
(91/263/EEC)
In accordance with the European Union Telecommunications Terminal Equipment Directive
91/263/EEC, the unit should not be directly connected to the Public Telecommunications
Network.
Double‐pole/Neutral Fusing
Zweipolige bzw. Neutralleiter‐Sicherung
Definition
Alternating Current
Fuse
International Symbols
Symbol
xii
Revision 4
MN/LBC4000.IOM
Definition
Protective Earth
Chassis Ground